# Question: A 3 0 M resistor is connected in series with an initially

A 3.0-MΩ resistor is connected in series with an initially uncharged 0.28-μF capacitor. This arrangement is then connected across four 1.5-V batteries (also in series).

(a) What is the maximum current in the circuit and when does it occur?

(b) What percentage of the maximum cur-rent is in the circuit after 4.0 s?

(c) What is the maximum charge on the capacitor and when does it occur?

(d) What percentage of the maximum charge is on the capacitor after 4.0 s?

(e) How much energy is stored in the capacitor after one time constant has elapsed?

(a) What is the maximum current in the circuit and when does it occur?

(b) What percentage of the maximum cur-rent is in the circuit after 4.0 s?

(c) What is the maximum charge on the capacitor and when does it occur?

(d) What percentage of the maximum charge is on the capacitor after 4.0 s?

(e) How much energy is stored in the capacitor after one time constant has elapsed?

**View Solution:**## Answer to relevant Questions

(a) In how many different ways can three 4.0-Ω resistors, be wired: (1) three, (2) five, or (3) seven? (b) Sketch the different ways you found in part (a) and determine the equivalent resistance for each. An ammeter has a resistance of 1.0mΩ. Sketch the circuit diagram and find (a) The current in the ammeter and (b) The voltage drop across a 10-Ω resistor that is in series with a 6.0-V ideal battery when the ammeter is ...One day your electric stove does not turn on. You decide to check the 240-V outlet to see if it is the problem. You use two voltmeter probes inserted into the out-let slots, but because of cramped conditions, you ...An air-filled parallel plate capacitor is being used in an electrical circuits laboratory. The plates are separated by 1.50 mm and each has a diameter of 15.0 cm. (a) What is the capacitance of this plate arrangement? (b) ...A charge of 0.250 C moves vertically in a field of 0.500 T that is oriented some angle from the vertical. If the charge’s speed is 2.0 x 102 m/s, what field angle(s) will ensure that the force acting on the charge is 5.0 ...Post your question