Question: Filaments in light bulbs usually fail just after the bulbs
Filaments in light bulbs usually fail just after the bulbs are turned on rather than when they have already been on for a while. Why?
Answer to relevant QuestionsA wire is connected across a steady voltage source. (a) If that wire is replaced with one of the same material that is twice as long and has twice the cross- sectional area, how will the current in the wire be affected? ...Sketch the following complete circuits, using the symbols shown in Learn by Drawing 17.1: (a) Two ideal 6.0- V batteries in series wired to a capacitor followed by a resistor; (b) Two ideal 12.0- V batteries in parallel, ...A net charge of 20 C passes a location in a wire in 1.25 min. How long does it take for a net 30-C charge to pass that location if the current in the wire is doubled? During a research experiment on the conduction of current in the human body, a medical technician attaches one electrode to the wrist and a second to the shoulder of a patient. If 100 mV is applied across the two electrodes ...A particular application requires a 20-m length of aluminum wire to have a 0.25-mΩ resistance at 20 oC. (a) What is the wire’s diameter? (b) What would its resistance be if its length was halved and it was then placed ...
Post your question