Give two examples of unethical behavior for each of these areas: inspection, process control, process capability. For each, name the relevant ethical principle.
Answer to relevant QuestionsSpecifications for a part for a DVD player state that the part should weigh between 24 and 25 ounces. The process that produces the parts has a mean of 24.5 ounces and a standard deviation of .2 ounce. The distribution of ...A medical facility does MRIs for sports injuries. Occasionally a test yields inconclusive results and must be repeated. Using the following sample data and n 200, determine the upper and lower control limits for the fraction ...For each of the accompanying control charts, analyze the data using both median and up/ down run tests with z = ± 1.96 limits. Are nonrandom variations present? Assume the centerline is the long-termmedian.A process that produces computer chips has a mean of .04 defective chip and a standard deviation of .003 chip. The allowable variation is from .03 to .05 defective. a. Compute the capability index for the process. b. Is the ...1. How did Jim conclude that the process was not capable based on his first set of samples? 2. Does the second set of samples show anything that the first set didn’t? Explain what and why. 3. Assuming the problem can be ...
Post your question