A hollow aluminum sphere, with an electrical heater in the center, is used in tests to determine the thermal conductivity of insulating materials. The inner and outer radii of the sphere are 0.15 and 0.18 m, respectively, and testing is done under steady-state conditions with the inner surface of the aluminum maintained at 250°C. In a particular test, a spherical shell of insulation is cast on the outer surface of the sphere to a thickness of 0.12 m. The system is in a room for which the air temperature is 20°C and the convection coefficient at the outer surface of the insulation is 30 W/m2 ∙ K. If 80 W are dissipated by the heater under steady-state conditions, what is the thermal conductivity of the insulation?
Answer to relevant QuestionsA spherical tank for storing liquid oxygen on the space shuttle is to be made from stainless steel of 0.80-m outer diameter and 5-mm wall thickness. The boiling point and latent heat of vaporization of liquid oxygen are 90 K ...As an alternative to storing radioactive materials in oceanic waters, it is proposed that the system of Problem 3.62 be placed in a large tank for which the flow of water, and hence the convection coefficient h, can be ...Consider cylindrical and spherical shells with inner and outer surfaces at r1 and r2 maintained at uniform temperatures Ts.1 and Ts.2 respectively. If there is uniform heat generation within the shells, obtain expressions ...Consider the clad fuel element of Problem 3.77. (a) Using appropriate relations from Tables C.1 and C.2, obtain an expression for the temperature distribution T(x) in the fuel element. For kf = 60 W/m ∙ K, L = 15 mm, ...The cross section of a long cylindrical fuel element in a nuclear reactor is shown. Energy generation occurs uniformly in the thorium fuel rod, which is of diameter D = 25 mm and is wrapped in a thin aluminum cladding. ...
Post your question