In addition to the data of Prob. 8–24, the dimensions of the cylinder are A = 3.5 in and an effective seal diameter of 4.25 in. The internal static pressure is 1500 psi. The outside diameter of the head is C = 8 in. The diameter of the bolt circle is 6 in, and so a bolt spacing in the range of 3 to 5 bolt diameters would require from 8 to 13 bolts. Select 10 SAE grade 5 bolts and find the resulting load factor n.
Answer to relevant QuestionsA 3/8 -in class 5 cap screw and steel washer are used to secure a cap to a cast-iron frame of a machine having a blind threaded hole. The washer is 0.065 in thick. The frame has a modulus of elasticity of 14 Mpsi and is ¼ ...In the figure for Prob. 8–20, let A = 0.9 m, B = 1 m, C = 1.10 m, D = 20 mm, and E = 25 mm. The cylinder is made of ASTM No. 35 cast iron (E = 96 GPa), and the head, of low-carbon steel. There are thirty-six M10 X 1.5 ISO ...The figure shows a bolted lap joint that uses SAE grade 8 bolts. The members are made of cold-drawn AISI 1040 steel. Find the safe tensile shear load F that can be applied to this connection if the following factors of ...A vertical channel 152 x 76 (see Table A–7) has a cantilever beam bolted to it as shown. The channel is hot-rolled AISI 1006 steel. The bar is of hot-rolled AISI 1015 steel. The shoulder bolts are M12 X 1.75 ISO 5.8. For a ...Given the following functions F(s), find f(t) if F(s) = s + 1 / s(s + 2) + (s + 3) F(s) = s2 + s + 1 / s(s + 2) + (s + 1)
Post your question