Question: A piston cylinder arrangement is loaded with a linear spring
A piston/cylinder arrangement is loaded with a linear spring and the outside atmosphere. It contains water at 5 MPa, 400C with the volume being 0.1 m3. If the piston is at the bottom, the spring exerts a force such that Plift 200 kPa. The system now cools until the pressure reaches 1200 kPa. Find the mass of water, the final state (T2, v2) and plot the P–v diagram for the process.
Answer to relevant QuestionsWater in a piston/cylinder is at 90C, 100 kPa, and the piston loading is such that pressure is proportional to volume, P CV. Heat is now added until the temperature reaches 200C. Find the ...A tank contains 2 kg of nitrogen at 100 K with a quality of 50%. Through a volume flow meter and valve, 0.5 kg is now removed while the temperature remains constant. Find the final state inside the tank and the volume of ...Determine the mass of an ethane gas stored in a 25 ft3 tank at 250 F, 440 lbf/in 2 using the compressibility chart. Estimate the error (%) if the ideal gas model is used.A sealed rigid vessel has volume of 35 ft3 and contains 2 lbm of water at 200 F. The vessel is now heated. If a safety pressure valve is installed, at what pressure should the valve be set to have a maximum temperature of ...Refrigerant-22 in a piston/cylinder arrangement is initially at 120 F, x 1. It is then expanded in a process so that P Cv1 to a pressure of 30 lbf/in 2. Find the final temperature and ...
Post your question