A composite laminate has been constructed from six identical layers of a plain (0/90 woven) aramid...

Transcribed Image Text:

A composite laminate has been constructed from six identical layers of a plain (0/90 woven) aramid fabric with epoxy resin. Each layer, or lamina, has a fibre volume fraction (V) of 0.7, and a resin volume fraction (VM) of 0.3. Each lamina constitutes 1/6th of the volume/thickness of the entire laminate. Use the rule of mixtures formula, with efficiency factor, to determine the tensile strength (1) of the entire laminate in the zero degree direction. The tensile strengths of the fibre (;) and resin (om) are 2951 MPa and 68 MPa, respectively. Give your answer to the nearest MPa. Following manufacture, it was found that the laminate has insufficient tensile strength for its desired application. It has been suggested that the two outermost laminas should be replaced with a uni-directional aramid fabric, with the fibres running parallel to the direction of applied load. This fabric will result in a fibre volume fraction 20% greater than that of the plain aramid fabric. Each uni- directional lamina will also constitute 18% of the total laminate volume/thickness. Use this information to determine by how much the tensile strength of the second laminate exceeds that of the first laminate. Give your answer in megapascals, correct to one decimal place. A composite laminate has been constructed from six identical layers of a plain (0/90 woven) aramid fabric with epoxy resin. Each layer, or lamina, has a fibre volume fraction (V) of 0.7, and a resin volume fraction (VM) of 0.3. Each lamina constitutes 1/6th of the volume/thickness of the entire laminate. Use the rule of mixtures formula, with efficiency factor, to determine the tensile strength (1) of the entire laminate in the zero degree direction. The tensile strengths of the fibre (;) and resin (om) are 2951 MPa and 68 MPa, respectively. Give your answer to the nearest MPa. Following manufacture, it was found that the laminate has insufficient tensile strength for its desired application. It has been suggested that the two outermost laminas should be replaced with a uni-directional aramid fabric, with the fibres running parallel to the direction of applied load. This fabric will result in a fibre volume fraction 20% greater than that of the plain aramid fabric. Each uni- directional lamina will also constitute 18% of the total laminate volume/thickness. Use this information to determine by how much the tensile strength of the second laminate exceeds that of the first laminate. Give your answer in megapascals, correct to one decimal place.

Answer rating: 100% (QA)

First lets calculate the tensile strength of the first laminate using the rule of mixtures ... View the full answer