A four-stroke, single cylinder petrol engine mounted on a motor cycle was put to load test....
Fantastic news! We've Found the answer you've been seeking!
Question:
Transcribed Image Text:
A four-stroke, single cylinder petrol engine mounted on a motor cycle was put to load test. The load measured on dynamometer was 30 kg with drum diameter and speed, respectively, at 900 mm and 2000 rpm. The engine consumed 0.15 kg of fuel in one minute, the calorific value of fuel being 43.5 MJ/kg. The fuel supply to the engine was stopped and was driven by a motor which needed 5 kW of power to keep it running at the same speed, the efficiency of the motor being 80%. The engine cylinder bore and stroke are respectively at 150 mm and 200 mm. Calculate (a) the brake power, (b) the indicated power, (c) the mechanical efficiency, (d) the brake thermal efficiency, (e) the indicated thermal efficiency, (f) the brake mean effective pressure and (vii) the indicated mean effective pressure. [IES, 2012] A four-stroke, single cylinder petrol engine mounted on a motor cycle was put to load test. The load measured on dynamometer was 30 kg with drum diameter and speed, respectively, at 900 mm and 2000 rpm. The engine consumed 0.15 kg of fuel in one minute, the calorific value of fuel being 43.5 MJ/kg. The fuel supply to the engine was stopped and was driven by a motor which needed 5 kW of power to keep it running at the same speed, the efficiency of the motor being 80%. The engine cylinder bore and stroke are respectively at 150 mm and 200 mm. Calculate (a) the brake power, (b) the indicated power, (c) the mechanical efficiency, (d) the brake thermal efficiency, (e) the indicated thermal efficiency, (f) the brake mean effective pressure and (vii) the indicated mean effective pressure. [IES, 2012]
Expert Answer:
Related Book For
Posted Date:
Students also viewed these mechanical engineering questions
-
A small pump is driven by a 2 kW motor with liquid water at 150 kPa, 10C entering. Find the maximum water flow rate you can get with an exit pressure of 1 MPa and negligible kinetic energies....
-
A pressure cylinder has a diameter of 150 mm and has a 6-mm wall thickness. What pressure can this vessel carry if the maximum shear stress is not to exceed 25 Mpa?
-
A small coil C with N = 200 turns is mounted on one end of a balance beam and introduced between the poles of an electromagnet as shown in Fig. 3.70. The cross-sectional area of the coil is S = 1.0...
-
Recall the rural medical clinics in Example 8.3 and suppose that each community were required to be 25 miles at most from the nearest clinic. How many clinics would be needed, and what would their...
-
Sunset Drive-Ins Ltd. issued a $500,000, 8%, 10-year bond payable on July 1, 2010, at a price of 94. Also assume that Sunsets accounting year ends on December 31. Journalize the following...
-
On November 1, 2020, the account balances of Beck Equipment Repair were as follows. During November, the following summary transactions were completed. Nov. 8 Paid 1,700 for salaries due employees,...
-
Given \(P(A)=0.30, P(B)=0.62\), and \(P(A \cap B)=\) 0.12 , find (a) \(P(A \cup B)\); (b) \(P(\bar{A} \cap B)\); (c) \(P(A \cap \bar{B})\); (d) \(P(\bar{A} \cup \bar{B})\).
-
1. What recent StuffDOT actions have added to its user-friendliness? 2. (a) Who are StuffDOTs major competitors and (b) what point(s) of difference should StuffDOT use to distinguish itself from...
-
state the accounting investment tools any business can use and the SWOT analysis?
-
The first quarter tax return needs to be filed for Prevosti Farms and Sugarhouse by April 15, 2019. For the purpose of the taxes, assume the second February payroll amounts were duplicated for the...
-
Please write a tax memo for the following couple: Matamba and Mandisa have three children. They are trying to decide if it is better for them to take the Dependent Care Credit as outlined in Chapter...
-
Think about how groupthink functions on social media. What specific real or hypothetical examples can you identify?
-
Burke believes that symbols, and language in particular, are critical in life. When he says that language acts as a terministic screen, what do you think he means? Provide some examples of how...
-
What difference does genre make to UGT? If Ryan wanted to see an action/adventure film or a quirky romantic comedy, how would that affect his choice between Netflix and the local movie multiplex? How...
-
CAT has been framed in the intercultural communication context. Based on your understanding of the theory, under what additional context(s) can the theory be understood?
-
How would you explain your family using any of the principles of Structuration Theory?
-
The following table shows the demand for a certain product for eight quarters. Forecast the demand for the last six quarters for these data using the centered moving average method: Year 1 Quarter 1...
-
The Place-Plus real estate development firm in Problem 24 is dissatisfied with the economists estimate of the probabilities of future interest rate movement, so it is considering having a financial...
-
The solid 30-mm-diameter shaft is used to transmit the torques applied to the gears. Determine the absolute maximum shear stress in the shaft. 300 N-m 500 N-m 200 N-m 400 N-m 300 mm B. 400 mm 500 mm
-
The triangular plate is fixed at its base, and its apex A is given a horizontal displacement of 5 mm. Determine the average normal strain ε x along the x axis. 45 800 mm 45 A' 5 mm 45%...
-
Determine the constant thickness of the rectangular tube if the average shear stress is not to exceed 12 ksi when a torque of T = 100 kip in. is applied to the tube. The mean dimensions of the tube...
-
Ferns that eject spores generally do so in pairs, with two spores flying off in opposite directions. The structure from which the spores are launched is quite lightweight. If it takes a certain...
-
A dog can provide sufficient power to pull a sled with a 60 N force at a steady 2.0 m/s. Suppose the dog is hitched to a different sled that requires 120 N to move at a constant speed. How fast can...
-
Most of the energy you expend in cycling is dissipated by the drag force. If you double your speed, you increase the drag force by a factor of 4. This increases the power to cycle at this greater...
Study smarter with the SolutionInn App