The steam trap is a device for purging steam condensate from a system without that no condensed steam comes out of it. In one of all the crudest types of traps, the Condensate collects and rises on a float attached to a drain plug. when the float reaches a certain level "pulls the plug", opening the drain valve and allowing the discharge the liquid. Afterwards, the float descends to its original position and the valve is closes, preventing uncondensed steam from escaping A) Suppose saturated steam at 25 bar is used to heat 100 kg/min of an oil from 135°C to 185°C. To achieve this it is necessary to transfer heat to the oil at rate of 1.00E4 kJ/min. Steam condenses on the outside of a tube bank through which the oil flows. The condensate collects at the bottom of the exchanger and exits through a steam trap set to discharge when they collect 1200 g of liquid. How often is the cheat downloaded?