The topology consists of eight routers named: R1, R2, R3, R4, R5, R6, R7, and R8. R1 consists of
64 hosts, and R8 consists of 64 hosts. The subnets used for the IP addresses are listed above each
interface in the topology below. The autonomous system number used is 1.
Tools Required
 Packet Tracer or GNS3
Each router must use the following:
 Routing Protocol: EIGRP
 Autonomous system number: 1

 

There are no ACLs used in this assignment.

 

 

Helpful Commands:
Helpful Command to know the interface status:
 Show ip int brief
 Show int description
 Show ip protocols
 Show ip eigrp interfaces
 Show ip route eigrp
 Show ip eigrp
 Show ip route
Example of Configuring EIGRP for network 192.168.30.0 with subnet mark 255.255.255.0
# router eigrp 1
# network 192.168.30.0 0.0.0.255

Transcribed Image Text:

SW 2 1 11.12.1316/30 50/0 R2 s0/1 11.12138/30 11.13124/30 R6 50/1 13.12.11.0/30 s0/0 s0/1 50/0 50/1 172.16.30.64/26 f0/0 R4 R1 /s0/0 R5 $0/2 R8 fo/o 172.16.30.0/26 $0/1 10.25160/30 $0/0 50/1 s0/1 50/2 s0/1 s0/0 R3 s0/0 10.25168/30 192.168.1904/30 10.251612/30 R7 s0/0 10.162512/30 SW 1 SW 2 1 11.12.1316/30 50/0 R2 s0/1 11.12138/30 11.13124/30 R6 50/1 13.12.11.0/30 s0/0 s0/1 50/0 50/1 172.16.30.64/26 f0/0 R4 R1 /s0/0 R5 $0/2 R8 fo/o 172.16.30.0/26 $0/1 10.25160/30 $0/0 50/1 s0/1 50/2 s0/1 s0/0 R3 s0/0 10.25168/30 192.168.1904/30 10.251612/30 R7 s0/0 10.162512/30 SW 1 SW 2 1 11.12.1316/30 50/0 R2 s0/1 11.12138/30 11.13124/30 R6 50/1 13.12.11.0/30 s0/0 s0/1 50/0 50/1 172.16.30.64/26 f0/0 R4 R1 /s0/0 R5 $0/2 R8 fo/o 172.16.30.0/26 $0/1 10.25160/30 $0/0 50/1 s0/1 50/2 s0/1 s0/0 R3 s0/0 10.25168/30 192.168.1904/30 10.251612/30 R7 s0/0 10.162512/30 SW 1