Question: The 5 kg block is falling downward
The 5-kg block is falling downward at v1 2 m/s when it is 8 m from the sandy surface, Determine the average impulsive force acting on the block by the sand if the motion of the block is stopped in 0.9 s once the block strikes the sand. Neglect the distance the block dents into the sand and assume the block does not rebound. Neglect the weight of the block during the impact with the sand.
Answer to relevant QuestionsA 30-tb block is initially moving along a smooth horizontal surface with a speed of v1 = 6 ft/s to the left. If it is acted upon by a force F, which varies in the manner shown, determine the velocity of the block in 15 s.The torsional coupling in the figure is composed of a curved beam of square cross section that is welded to an input shaft and output plate. A torque is applied to the shaft and cycles from zero to T. The cross section of ...A rotating-beam specimen with an endurance limit of 50 kpsi and an ultimate strength of 100 kpsi is cycled 20 percent of the time at 70 kpsi, 50 percent at 55 kpsi, and 30 percent at 40 kpsi. Let f = 0.9 and estimate the ...A 1/4 by 3/2 -in steel bar has a 3/4 -in drilled hole located in the center, much as is shown in Table A–15–1. The bar is subjected to a completely reversed axial load with a deterministic load of 1200 lbf. The material ...What do we mean when we say that an accounting system needs to be “cost-effective”?
Post your question