Question: Which rock unit in Fig 5 3 diagrammatically
Which rock unit in Fig. 5.3 diagrammatically illustrates sedimentary facies?
Answer to relevant QuestionsA 1/4 -in drill rod was heat-treated and ground. The measured hardness was found to be 490 Brinell. Estimate the endurance strength if the rod is used in rotating bending.Estimate the endurance strength of a 32-mm-diameter rod of AISI 1035 steel having a machined finish and heat-treated to a tensile strength of 710 MPa.Repeat Prob. 6–12 but with a steady torsional stress of 138 MPa and an alternating bending stress of 69 MPa.The figure shows a formed round-wire cantilever spring subjected to a varying force. The hardness tests made on 25 springs gave a minimum hardness of 380 Brinell. It is apparent from the mounting details that there is no ...The figure shows the free-body diagram of a connecting-link portion having stress concentration at three sections. The dimensions are r = 0.25 in, d = 0.75 in, h = 0.50 in, w1 = 3.75 in, and w2 = 2.5 in. The forces F ...
Post your question