An 8.00 kg block of steel is at rest on a horizontal table. The coefficient of static
Question:
An 8.00 kg block of steel is at rest on a horizontal table. The coefficient of static friction between the block and the table is 0.450. A force is to be applied to the block. To three significant figures, what is the magnitude of that applied force if it puts the block on the verge of sliding when the force is directed
(a) Horizontally,
(b) Upward at 60.0o from the horizontal, and
(c) Downward at 60.0o from the horizontal?
Step by Step Answer:
a To be on the verge of sliding means the applied force is equal to the maximum possible force ...View the full answer
Fundamentals of Physics
ISBN: 978-0471758013
8th Extended edition
Authors: Jearl Walker, Halliday Resnick
Related Video
Static friction and kinetic friction are two types of friction that occur when two objects are in contact with each other. Static friction is the force that must be overcome to initiate motion between two surfaces that are in contact with each other but are not moving relative to each other. It is caused by the interlocking of rough surfaces at the microscopic level, and it increases as the force pushing the surfaces together increases. Once motion between the surfaces starts, the static friction is no longer present. Kinetic friction, also known as sliding friction, is the force that opposes the motion of two surfaces that are in contact with each other and are moving relative to each other. It is caused by the rubbing of the surfaces against each other and the resistance of the molecules in the surfaces to being moved. Kinetic friction is generally less than static friction, but it can still be a significant force, especially at high speeds. Both static and kinetic friction can be quantified using a coefficient of friction, which is a dimensionless number that represents the ratio of the frictional force between two surfaces to the normal force (the force perpendicular to the surfaces). The coefficient of static friction is typically greater than the coefficient of kinetic friction for a given pair of surfaces, because it takes more force to overcome the interlocking of the surfaces at rest than to maintain motion once it has started.
Students also viewed these Mechanics questions
-
An 11 kg block of steel is at rest on a horizontal table. The coefficient of static friction between block and table is 0.52. (a) What is the magnitude of the horizontal force that will put the block...
-
The coefficient of static friction between a block and a horizontal floor is 0.35, while the coefficient of kinetic friction is 0.22. The mass of the block is 4.6 kg and it is initially at rest. (a)...
-
The coefficient of static friction between block A and a horizontal floor is 0.45 and the coefficient of static friction between block B and the floor is 0.30. The mass of each block is 2.0 kg and...
-
Why are all three levels of Transfer Meaning Making Acquisition important? What would happen if we left one out of our unit design?
-
Since 1950, long-term government bonds have averaged a higher interest rate than short-term government bonds. Why?
-
Suppose a customer rents a vehicle for three months from Commodores Rental on November 1, paying $4,500 ($1,500/month). (1) Record the rental for Commodores on November 1. (2) Record the adjusting...
-
Describe various forms of elder abuse, how to recognize it, and reporting requirements.
-
RadioShack Corporation primarily engages in the retail sale of consumer electronics goods and services through 4,467 company-operated stores under the RadioShack brand, located throughout the United...
-
(a) Consider a put option on a non-dividend paying stock when the stock price is 4.50, the exercise price is 5.00, the continuously compounded rate of return is 3.5% per annum, the volatility is 18%...
-
ChemLabs uses raw materials I and II to produce two domestic cleaning solutions, A and B. The daily availabilities of raw materials I and II are 150 and 145 units, respectively. One unit of solution...
-
A box of canned goods slides down a ramp from street level into the basement of a grocery store with acceleration 0.15 m/s 2 directed down the ramp. The ramp makes an angle of 40 with the horizontal....
-
In Figure a box of ant aunts (total mass m 1 = 1.65 kg) and a box of ant uncles (total mass m 2 = 3.30 kg) slide down an inclined plane while attached by a mass less rod parallel to the plane. The...
-
For the following exercises, write the first eight terms of the piecewise sequence. a = 11 1 -0.6 5- if n is prime or 1 2.5 (-2)- if n is composite .
-
Determine enthalpy and internal energy of \(1 \mathrm{~kg}\) of steam at a pressure of 12 bar when: (i) the dryness fraction of steam is 0.8 , (ii) steam is dry and saturated, and (iii) steam is...
-
In the following \(\mathrm{R}\) output, some of the numbers have been accidentally erased. Recompute them, using the numbers still available. There are \(n=25\) points in the data set. Coefficients:...
-
Calculate the average force air discharge from a compressor to compress a tank of 1000 L 1 kg/cm2 to 5 kg/cm2 at 30C 2 h.
-
A monoacidic sugar extracted from water into hexanol has partition coefficients of 4.5 and 2.0 at \(\mathrm{pH} 4.0\) and 5.5, respectively, both at the same temperature. Estimate the value of...
-
Plot the specified output by using the RK4 method. \(3 \ddot{x}+\dot{x}+x^{3}=\frac{4}{3}, x(0)=\frac{1}{3}, \dot{x}(0)=0,0 \leq t \leq 20\), output: \(\dot{x}\)
-
Isopropanol (1) and water (2) are condensing in the presence of nitrogen (3) inside a vertical tube of \(2.54 \mathrm{~cm}\) inside diameter. At the vapor inlet, the bulk composition of the gas phase...
-
Consider the function f and its graph. a. Estimate the zeros of the area function b. Estimate the points (if any) at which A has a local maximum or minimum. c. Sketch a graph of A, for 0 x 10,...
-
Models are particularly useful in relativity and quantum mechanics, where conditions are outside those normally encountered by humans. What is a model?
-
Two emission lines have wavelengths λ and λ + Πλ, respectively, where Πλ Where d is the slit separation and m is the order at which...
-
(a) In a double-slit experiment, what largest ratio of d to a causes diffraction to eliminate the fourth bright side fringe? (b) What other bright fringes are also eliminated?
-
A grating has 600 rulings / mm and is 5.0 mm wide. (a) What is the smallest wavelength interval it can resolve in the third order at = 500 nm? (b) How many higher orders of maxima can be seen?
-
Compare and contrast Russia and the United States using Hofstede's four original cultural dimensions: power distance, uncertainty avoidance, individualism versus collectivism, and masculinity versus...
-
Suppose you wanted to know the mean VO2max in milliliters per kilogram per minute of all females at a university. You randomly select 50 names from the files of the administration office and invite...
-
(a) A local printer (within the network) is turned on but is not responding from other computers. (b) What tool will allow you to know if it is connected to the network? PING IFCONFIG IPCNONFIG...
Study smarter with the SolutionInn App