An oil pump is drawing 25 kW of electric power while pumping oil with r = 860
Question:
An oil pump is drawing 25 kW of electric power while pumping oil with r = 860 kg/m3at a rate of 0.1 m3/s. The inlet and outlet diameters of the pipe are 8 cm and 12 cm, respectively. If the pressure rise of oil in the pump is measured to be 250 kPa and the motor efficiency is 90 percent, determine the mechanical efficiency of the pump. Take the kinetic energy correction factor to be 1.05.
25 kW 12 cm Pump Motor 8 cm Oil AP= 250 kPa 0.1 m/s
Step by Step Answer:
A pump is pumping oil at a specified rate The pressure rise of oil in the pump is measured and the m...View the full answer
Fundamentals of Thermal-Fluid Sciences
ISBN: 978-0078027680
5th edition
Authors: Yunus A. Cengel, Robert H. Turner, John M. Cimbala
Related Video
Static friction and kinetic friction are two types of friction that occur when two objects are in contact with each other. Static friction is the force that must be overcome to initiate motion between two surfaces that are in contact with each other but are not moving relative to each other. It is caused by the interlocking of rough surfaces at the microscopic level, and it increases as the force pushing the surfaces together increases. Once motion between the surfaces starts, the static friction is no longer present. Kinetic friction, also known as sliding friction, is the force that opposes the motion of two surfaces that are in contact with each other and are moving relative to each other. It is caused by the rubbing of the surfaces against each other and the resistance of the molecules in the surfaces to being moved. Kinetic friction is generally less than static friction, but it can still be a significant force, especially at high speeds. Both static and kinetic friction can be quantified using a coefficient of friction, which is a dimensionless number that represents the ratio of the frictional force between two surfaces to the normal force (the force perpendicular to the surfaces). The coefficient of static friction is typically greater than the coefficient of kinetic friction for a given pair of surfaces, because it takes more force to overcome the interlocking of the surfaces at rest than to maintain motion once it has started.
Students also viewed these Physics questions
-
An oil pump is drawing 35 kW of electric power while pumping oil with r = 860 kg/m3 at a rate of 0.1 m3/s. The inlet and outlet diameters of the pipe are 8 cm and 12 cm, respectively. If the pressure...
-
An oil pump is drawing 44 kW of electric power while pumping oil with r 5 860 kg/m3 at a rate of 0.1 m3/s. The inlet and outlet diameters of the pipe are 8 cm and 12 cm, respectively. If the pressure...
-
The driving force for fluid flow is the pressure difference, and a pump operates by raising the pressure of a fluid (by converting the mechanical shaft work to flow energy). A gasoline pump is...
-
Many areas have attempted to increase the amount of recycled waste lubricating oil by requiring service stations to serve as collection centers or by instituting deposit-refund systems. On what...
-
In the preceding problem, suppose the block of wood with the ball "high and dry" is floating in a tank of water. (a) When the block is inverted, does the water level in the tank increase, decrease,...
-
Interpolate in Table 7-1 to find the activity coefficient of H+ when = 0.030M.
-
Which conditions for the binomial distribution, if any, fail to hold in the following situations? (a) The number of persons having a cold at a family reunion attended by 30 persons. (b) Among 8...
-
You have a choice of borrowing money from a finance company at 24 percent compounded monthly or borrowing money from a bank at 26 percent compounded annually. Which alternative is the most attractive?
-
Granada Inc. applies overhead to production at a predetermined rate of 0.79 based on direct labor cost. Job No. 250, the only job still in process at the end of September, has been charged with...
-
Suppose that the burning times of electric light bulbs approximate a normal curve with a mean of 1200 hours and a standard deviation of 120 hours. What proportion of lights burn for (a) Less than 960...
-
Water is being pumped from a large lake to a reservoir 25 m above at a rate of 25 L/s by a 10-kW (shaft) pump. If the irreversible head loss of the piping system is 5 m, determine the mechanical...
-
Reconsider Prob. 1245E. Determine the flow rate of water if the irreversible head loss of the piping system between the free surfaces of the inlet and the outlet is 36 ft. In Problem In a...
-
For what items might a government need to adjust interest expenditures amounts to convert them to interest expenses?
-
notesup sdt erwarts 10 umstele di estalqmas Question 10. Find the velocity of the body at time t = 3 s. 4)40jm/s B)20[-i+2j]m/s C)20[-ilm/s D)40[-i+j)m/s E)20[-2i+j)m/s Question 11. Find the position...
-
A3.0-m-long steel chain is stretched out along the top level of a horizontal scaffold at a construction site, in such a way that 2.0 m of the chain remains on the top level and 1.0 m hangs...
-
A certain engineIt is Electrical consists of a thin rectangular coil of current-conducting wire that rotates in the presence of a magnetic field. It isuniform magnitude0.800 T. The coil has88 turns...
-
What is the electric field (in N/C) at a point where the force on a -3.0 x 10-6 C charge is (4.51-6.6) x 10-6 N? (Express your answer in vector form.) E = t N/C Additional Materials Reading
-
Two charged spheres are placed as shown above. The size of the sphere represents how much charge it has. Choose the position (indicated by A, B, C, or D) where there would be zero net force on an...
-
There are 15 jobs that must be done by 10 employees. Each job must be done by a single employee, and each employee can do at most two jobs. The times (in minutes) for the employees to do the jobs are...
-
Which of the following is FALSE regarding the purchasing power parity (PPP). a. The PPP is a manifestation of the law of one price b. The PPP says that a country with a higher expected inflation can...
-
A pickup truck is carrying a toolbox, but the rear gate of the truck is missing, so the box will slide out if it is set moving. The coefficients of kinetic and static friction between the box and the...
-
Consider the system shown in Fig. E5.34. Block A weighs 45.0 N and block B weighs 25.0 N. Once block B is set into downward motion, it descends at a constant speed. (a) Calculate the coefficient of...
-
While a person is walking, his arms swing through approximately a 45 angle in s. As a reasonable approximation, we can assume that the arm moves with constant speed during each swing. A typical arm...
-
How do I view vector and bitmap images in a VR headset?
-
The radius of a solid conducting sphere is R = 14.0 cm and it has a uniformly distributed charge of 30.5 nC on its surface. The center of the sphere is at the origin of the xy coordinate system. The...
-
What is the best file format for digital images, such as photos and scans?
Study smarter with the SolutionInn App