A horizontal tube having a diameter of 30 cm is maintained at a constant temperature of 204oC

Question:

A horizontal tube having a diameter of 30 cm is maintained at a constant temperature of 204oC and exposed to helium at 3 atm and 93oC. Calculate the heat lost from the tube for a tube length of 10.4 m. Express in units of watts.

Fantastic news! We've Found the answer you've been seeking!

Step by Step Answer:

Related Book For book-img-for-question

Heat Transfer

ISBN: 978-0073529363

10th edition

Authors: Jack Holman

See More Books

Question Posted: Apr 22, 2016 05:07 AM

See More Questions

A horizontal tube having a 1.25-cm OD is submerged in water at 1 atm and 100oC. Calculate the heat flux for surface temperatures of (a) 540oC, (b) 650oC, and (c) 800oC. Assume = 0.8, and use Equation...
An elastic air balloon having a diameter of 30 cm is attached to the base of a container partially filled with water at + 4C, as shown in Fig. P11??43. If the pressure of the air above the water is...
Helium at 150 kPa and 20oC is forced at 50 m/s across a horizontal cylinder having a diameter of 30 cm and a length of 6 m. Calculate the heat lost by the cylinder if its surface temperature is...
Assume electricity is generated by three technologies: a base load technology with cost function C b (x b ) and proportional emission coefficient b ; gas turbines with cost function C g (x g ) and...
For a random sample of 36 items and a sample mean of 211, compute a 95% confidence interval for if the population standard deviation is 23. Round the answers to 2 decimal places.
Governments that have implemented major cuts in higher rates of income tax have been accused of giving more money to the rich at the expense of the poor. Construct an argument to counter such an...
What pressure gradient along the streamline, $d p / d s$, is required to accelerate water upward in a vertical pipe at a rate of $30 \mathrm{ft} / \mathrm{s}^{2}$ ? What is the answer if the flow...
Benjamin Moses, chief engineer of Offshore Chemicals, Inc., must decide whether to build a new processing facility based on an experimental technology. If the new facility works, the company will...
What is the effect of thermal boundary layers on convective heat transfer in turbulent flows? Discuss how advanced turbulence modeling techniques, such as Large Eddy Simulation (LES) and Direct...
Margo, a calendar year taxpayer, paid $1,580,000 for new machinery (seven-year recovery property) placed in service on August 1, 2023. a. Assuming that the machinery was the only tangible property...
A vertical flat plat maintained at 350 K is exposed to room air at 300 K and 1 atm. Estimate the plate height necessary to produce a free-convection boundary layer thickness of 2.0 cm.
A large bare duct having a diameter of 30 cm runs horizontally across a factory area having environmental conditions of 20oC and 1 atm. The length of the duct is 100 m. Inside the duct a low pressure...
A company has a very profitable year. What explanations might there be for a decrease in cash?
A Ltd maintains an MS of 37.5% with an overall ContributionSales ratio of 40%. If the Fixed Costs amount to Rs. 5 lakhs, calculate the following: (a) BES; (b) Total Sales; (c) Total Variable Cost;...
North Carolina broker Greg is helping his seller client Kali sell her condo. He's including the Owners' Association Disclosure Addendum with the Offer to Purchase and Contract form. Based on this...
Dave is a salaried employee who works in a gas station. He only earns from his job and has no other source of income. He gets a big tax refund at the end of the year but is always struggling to cover...
What are the three tax statuses (i.e., categories / classifications) of property for tax purposes? What is the "default" tax status of an asset What are the two primary accounting methods used by...
1957 ford Original Cost is 32k. FMV at Conversion is $32k. Using MACRS Rates- Half Year Convention. What is the basis for depreciation and Year 1 Depreciation amount and what is the appropriate...
The following information is taken from the 2014 annual report of Bugant, Inc. Bugants fiscal year ends December 31 of each year. Bugants December 31, 2014, balance sheet is as follows. Additional...
Compare and contrast licensing and subcontracting.
Determine the Jacobian matrix [J] and its determinant for the elements shown in Figure P10-11. Show that the determinant of [J] for rectangular and parallelogram shaped elements is equal to A / 4,...
Derive Eq. (10.2.18) with [Bi] given by Eq. (10.2.19) by substituting Eq. (10.2.16) for [D'] and Eqs. (10.2.5) for the shape functions into Eq. (10.2.17).
Use Eq. (10.2.30) with ps = 0 and pt = p (a constant) alongside 3-4 of the element shown in Figure 10-5 on page 500 to obtain the nodal forces? Figure P10-5 (a) (b) A (XA = 13 in.) X = 10 in. =0.006...
Shahid Pakistan Limited (SPL) is engaged in the production of three products: J, K and L. Following is the extract from its latest annual management accounts: Description J Products K Total L Units...
John Company produces hats and sells them for $100 each. His cost to produce the hats are: DM 20 per unit DL 30 per unit VMOH 10 per unit FMOH 40,000 Selling expenses are $5 per unit and are all...
John Company produces hats and sells them for $100 each. His cost to produce the hats are: DM 20 per unit DL 30 per unit VMOH 10 per unit FMOH 40,000 Selling expenses are $5 per unit and are all...

A horizontal tube having a diameter of 30 cm is maintained at a constant temperature of 204oC

Question:

Step by Step Answer:

T f 204 93 2 1485 o C 4215 K ...View the full answer

Heat Transfer

Students also viewed these Thermodynamics questions