Question: An x chart has a center line of 100 uses
An x chart has a center line of 100, uses three-sigma control limits, and is based on a sample size of four. The process standard deviation is known to be six. If the process mean shifts from 100 to 92, what is the probability of detecting this shift on the first sample following the shift?
Answer to relevant QuestionsDiscuss why it is important to establish control on the R chart first when using x and R control charts to bring a process into statistical control Two parts are assembled as shown in Figure 6.28. Assume that the dimensions x and y are normally distributed with means x and y and standard deviations x and y, respectively. The parts are produced on different ...Control charts for with n = 4 are maintained on a quality characteristic. The parameters of these charts are as follows and x s Both charts exhibit control. Specifications on the quality characteristic are 197.50 and ...A normally distributed quality characteristic is monitored through use of an Both charts exhibit control. (a) What is the estimated standard deviation of the process? (b) Suppose an s chart were to be substituted for the R ...The data shown in Table 6E.2 are x and R values for 24 samples of size n = 5 taken from a process producing bearings. The measurements are made on the inside diameter of the bearing, with only the last three decimals ...
Post your question