Question: An industrial load consumes 100 kW at 0 8
An industrial load consumes 100 kW at 0.8 pf lagging. If an ammeter in the transmission line indicates that the load current is 284 A rms, find the load voltage.
Answer to relevant QuestionsAn industrial load that consumes 80 kW is supplied by the power company through a transmission line with 0.1 ohms resistance, with 84kW. If the voltage at the load is 440 Vrms, find the power factor at the load.A transmission line with impedance 0.08 – j 0.25 ohms is used to deliver power to a load. The load is inductive and the3 load voltage is 220 0 V rms at 60 Hz. If the load requiresWhat value of capacitance must be placed in parallel with the 18-kW load in Problem 9.51 in order to raise the power factor of this load to 0.9 lagging?A single-phase three-wire 60-Hz circuit serves three loads, as shown in Fig P9.64. Determine L.qa, L.nN, Lc, and the energy use over a 24-hour period in kilowatt-hours.A rms-reading volmeter is connected to the output of the op-amp shown in Fig. 9PFE-4. Determine the meter reading.
Post your question