Need help solving for my IT class. We're currently using Cisco packer tracer in class. If you could give step by step help that'll be greatly appreciate.

Transcribed Image Text:

Device R-Edge Core-l Core-II Dist-l Dist-II Dist-III Access-l Access-11 Access-III Interface G0/0/0.5 G0/0/0.50 G0/0/0.99 VLAN 99 VLAN 99 VLAN 99 VLAN 99 VLAN 99 VLAN 99 VLAN 99 VLAN 99 IP/Mask 10.5.0.1/255.255.0.0 10.50.0.1/255.255.0.0 172.16.99.1/255.255.255.0 172.16.99.10/255.255.255.0 172.16.99.11/255.255.255.0 172.16.99.20/255.255.255.0 172.16.99.21/255.255.255.0 172.16.99.22/255.255.255.0 172.16.99.50/255.255.255.0 172.16.99.51/255.255.255.0 172.16.99.52/255.255.255.0 6. VLAN Trunking Protocol (VTP). a. Implement VTP to define the VLANs on the switches (i.e., you don't need to define the VLANs manually on each individual switch). b. Use the Core-l as the VTP server. c. Use the VTP domain name: SISAC. 7. PVST+ with load balancing. a. You need to configure the switches with PVST+ to avoid switching loops. b. Use Core-l as the root bridge of VLAN 5 and VLAN 99. c. Use Core-Il as the root bridge of VLAN 50. Extra credit The upstream connection between Core-I and R-Edge appears as a single port connection in the figure. Implement this connection as a 2-port EtherChannel between the switch and the router for extra credit. Device R-Edge Core-l Core-II Dist-l Dist-II Dist-III Access-l Access-11 Access-III Interface G0/0/0.5 G0/0/0.50 G0/0/0.99 VLAN 99 VLAN 99 VLAN 99 VLAN 99 VLAN 99 VLAN 99 VLAN 99 VLAN 99 IP/Mask 10.5.0.1/255.255.0.0 10.50.0.1/255.255.0.0 172.16.99.1/255.255.255.0 172.16.99.10/255.255.255.0 172.16.99.11/255.255.255.0 172.16.99.20/255.255.255.0 172.16.99.21/255.255.255.0 172.16.99.22/255.255.255.0 172.16.99.50/255.255.255.0 172.16.99.51/255.255.255.0 172.16.99.52/255.255.255.0 6. VLAN Trunking Protocol (VTP). a. Implement VTP to define the VLANs on the switches (i.e., you don't need to define the VLANs manually on each individual switch). b. Use the Core-l as the VTP server. c. Use the VTP domain name: SISAC. 7. PVST+ with load balancing. a. You need to configure the switches with PVST+ to avoid switching loops. b. Use Core-l as the root bridge of VLAN 5 and VLAN 99. c. Use Core-Il as the root bridge of VLAN 50. Extra credit The upstream connection between Core-I and R-Edge appears as a single port connection in the figure. Implement this connection as a 2-port EtherChannel between the switch and the router for extra credit.