Bob Morden, Treasure Trophy Company's new general manager, was about to set the selling prices for...
Fantastic news! We've Found the answer you've been seeking!
Transcribed Image Text:
Bob Morden, Treasure Trophy Company's new general manager, was about to set the selling prices for an order from the Royal Golf Club. The club had requested quotes before deciding on their purchase. Morden wondered what his own company's (i.e., the manufacturer's) costs were for filling the order so that he could provide a competitive quote on the order. Treasure Trophy Company (Treasure) manufactured trophies for all kinds of sports, businesses and celebratory events. All trophies were made to order, sometimes for retail stores and sometimes directly for the organizers of the events. Several trophy manufacturers competed for this business, and since their capabilities were about the same, prices were set with reference to a fairly narrow competitive range. Treasure used a job order system of cost accumulation. The company did not use a standard cost system since its products were all customized. The manufacturing process was divided into three departments: forming, finishing and assembly. The raw materials were machined to make up finished parts in the forming department. In the finishing department, these parts were sanded, polished, lacquered or subjected to whatever other finishing operations the job required. Any engraving was done in the finishing department. The assembly operation involved joining parts together to form the trophy, which most commonly meant gluing. Decals might also be glued onto trophies in the finishing department, particularly in the case of less expensive trophies that had little or no engraving. The company's budgeted costs for the year 2014 are shown in Exhibit 1. A single supervisor oversaw all three departments. His responsibilities included scheduling orders, ensuring that schedules were met, and verifying that trophies were produced to specifications. The costs shown for shipping did not include any allocation of rent or light and heat. The entire factory building was rented. It had a floor area of 15,000 square feet. The forming department contained 4,000 square feet; the finishing and assembly departments each occupied 3,000 square feet, and the remainder of the building was used for offices, material storage, and shipping and receiving. The forming department had two machines, each rated at 15 horsepower, and the finishing department had two 10-horsepower machines. All work in the assembly department was done by hand. The machines in the forming department had originally cost $360,000, and the ones in the finishing department had cost $240,000. All machinery was depreciated over 10 years using the straight-line method with no estimated residual value. Insurance expense was calculated based on the historical cost of the machines. The best estimate for repairs expenses was based on the proportionate horsepower of the machines. No supplies were required for the forming department since all the material used was considered a direct material cost. Supplies expenses were roughly equal for the finishing and assembly departments. A job cost sheet was prepared by the supervisor for every order processed by the company. Exhibit 2 contains an incomplete job cost sheet for Job Order No. 35, which required 80 golfing trophies. The budgeted direct labour cost of $210,000 was made up of $56,000 for the forming department, $84,000 for the finishing department, and $70,000 for the assembly department. Exhibit 3 contains a cost assignment and allocation worksheet, which had recently been designed by the supervisor. Morden sat down to set a price for the Royal Golf Club order. To begin with, he wondered what Treasure's costs were for filling the order. As well, he was concerned about what factors should be taken into account in the pricing process and what price should be quoted on the order. EXHIBIT 1: BUDGETED COSTS FOR 2014 Direct labour $ 210,000 Direct material Supervision General manager's salary Supplies Shipping' Power Rent Light and heat Depreciation on machinery Insurance on machinery Repairs Selling expenses Administrative expenses 140,000 51,500 105,000 42,000 30,000 13,500 54,000 18,000 60,000 6,000 6,500 70,000 33,500 EXHIBIT 2: JOB COST SHEET Treasure Trophy Company Customer: Royal Golf Club Box 11258 Carstairs, Alberta Date: April 6, 2014 Job Order No.: 35 Order No. 3515 No. of Units: 80 Material Labour Rate Labour Overhead Department Cost Hours Cost Applied Total $ 301.00 $ 14.00 $ 140.00 Forming Finishing Assembly Total 10.0 15.0 21.00 315.00 17.50 10.0 35.0 175.00 $ 301.00 $ 630.00 1 Includes costs for shipping finished goods to customers only. EXHIBIT 3: ANNUAL COST ASSIGNMENT AND ALLOCATION WORKSHEET Total Forming Finishing Assembly Direct Costs Direct labour $ 210,000 Direct material 140.000 Total direct costs 350,000 Factory Overhead Costs Supervision 51.500 Supplies 42,000 Power 13.500 Rent 36,000 Light and heat 12.000 Depreciation, machinery 60,000 Insurance, machinery 6.000 Repairs 6,500 Total factory overhead costs 227.500 Administrative Costs General manager's salary 105.000 Shipping 30.000 Rent 18,000 Light and heat 6.000 Selling expenses 70,000 Administrative expenses 33.500 Total administrative expenses 262,500 Overhead Application Rates Factory overhead application rate (FOH expenses + Direct labour) Total overhead application rate (Total expenses - Direct labour) 1. Allocate manufacturing overhead to departments. Specific overhead items should be allocated on an individual basis when there is a logical basis for doing so. 2. Develop overhead application rates for the three departments on the basis of direct labor cost. 3. Complete the job cost sheet shown in case Exhibit 2 in order to get the total cost for the job based on the full costing method. 4. Calculate the cost of each of the two jobs using the direct costing method. 5. As Bob Morden, what factors would you consider before setting a firm quote for these two orders? 6. What price should Treasure Trophy Company be willing to quote for the Royal Golf Club? Bob Morden, Treasure Trophy Company's new general manager, was about to set the selling prices for an order from the Royal Golf Club. The club had requested quotes before deciding on their purchase. Morden wondered what his own company's (i.e., the manufacturer's) costs were for filling the order so that he could provide a competitive quote on the order. Treasure Trophy Company (Treasure) manufactured trophies for all kinds of sports, businesses and celebratory events. All trophies were made to order, sometimes for retail stores and sometimes directly for the organizers of the events. Several trophy manufacturers competed for this business, and since their capabilities were about the same, prices were set with reference to a fairly narrow competitive range. Treasure used a job order system of cost accumulation. The company did not use a standard cost system since its products were all customized. The manufacturing process was divided into three departments: forming, finishing and assembly. The raw materials were machined to make up finished parts in the forming department. In the finishing department, these parts were sanded, polished, lacquered or subjected to whatever other finishing operations the job required. Any engraving was done in the finishing department. The assembly operation involved joining parts together to form the trophy, which most commonly meant gluing. Decals might also be glued onto trophies in the finishing department, particularly in the case of less expensive trophies that had little or no engraving. The company's budgeted costs for the year 2014 are shown in Exhibit 1. A single supervisor oversaw all three departments. His responsibilities included scheduling orders, ensuring that schedules were met, and verifying that trophies were produced to specifications. The costs shown for shipping did not include any allocation of rent or light and heat. The entire factory building was rented. It had a floor area of 15,000 square feet. The forming department contained 4,000 square feet; the finishing and assembly departments each occupied 3,000 square feet, and the remainder of the building was used for offices, material storage, and shipping and receiving. The forming department had two machines, each rated at 15 horsepower, and the finishing department had two 10-horsepower machines. All work in the assembly department was done by hand. The machines in the forming department had originally cost $360,000, and the ones in the finishing department had cost $240,000. All machinery was depreciated over 10 years using the straight-line method with no estimated residual value. Insurance expense was calculated based on the historical cost of the machines. The best estimate for repairs expenses was based on the proportionate horsepower of the machines. No supplies were required for the forming department since all the material used was considered a direct material cost. Supplies expenses were roughly equal for the finishing and assembly departments. A job cost sheet was prepared by the supervisor for every order processed by the company. Exhibit 2 contains an incomplete job cost sheet for Job Order No. 35, which required 80 golfing trophies. The budgeted direct labour cost of $210,000 was made up of $56,000 for the forming department, $84,000 for the finishing department, and $70,000 for the assembly department. Exhibit 3 contains a cost assignment and allocation worksheet, which had recently been designed by the supervisor. Morden sat down to set a price for the Royal Golf Club order. To begin with, he wondered what Treasure's costs were for filling the order. As well, he was concerned about what factors should be taken into account in the pricing process and what price should be quoted on the order. EXHIBIT 1: BUDGETED COSTS FOR 2014 Direct labour $ 210,000 Direct material Supervision General manager's salary Supplies Shipping' Power Rent Light and heat Depreciation on machinery Insurance on machinery Repairs Selling expenses Administrative expenses 140,000 51,500 105,000 42,000 30,000 13,500 54,000 18,000 60,000 6,000 6,500 70,000 33,500 EXHIBIT 2: JOB COST SHEET Treasure Trophy Company Customer: Royal Golf Club Box 11258 Carstairs, Alberta Date: April 6, 2014 Job Order No.: 35 Order No. 3515 No. of Units: 80 Material Labour Rate Labour Overhead Department Cost Hours Cost Applied Total $ 301.00 $ 14.00 $ 140.00 Forming Finishing Assembly Total 10.0 15.0 21.00 315.00 17.50 10.0 35.0 175.00 $ 301.00 $ 630.00 1 Includes costs for shipping finished goods to customers only. EXHIBIT 3: ANNUAL COST ASSIGNMENT AND ALLOCATION WORKSHEET Total Forming Finishing Assembly Direct Costs Direct labour $ 210,000 Direct material 140.000 Total direct costs 350,000 Factory Overhead Costs Supervision 51.500 Supplies 42,000 Power 13.500 Rent 36,000 Light and heat 12.000 Depreciation, machinery 60,000 Insurance, machinery 6.000 Repairs 6,500 Total factory overhead costs 227.500 Administrative Costs General manager's salary 105.000 Shipping 30.000 Rent 18,000 Light and heat 6.000 Selling expenses 70,000 Administrative expenses 33.500 Total administrative expenses 262,500 Overhead Application Rates Factory overhead application rate (FOH expenses + Direct labour) Total overhead application rate (Total expenses - Direct labour) 1. Allocate manufacturing overhead to departments. Specific overhead items should be allocated on an individual basis when there is a logical basis for doing so. 2. Develop overhead application rates for the three departments on the basis of direct labor cost. 3. Complete the job cost sheet shown in case Exhibit 2 in order to get the total cost for the job based on the full costing method. 4. Calculate the cost of each of the two jobs using the direct costing method. 5. As Bob Morden, what factors would you consider before setting a firm quote for these two orders? 6. What price should Treasure Trophy Company be willing to quote for the Royal Golf Club? Bob Morden, Treasure Trophy Company's new general manager, was about to set the selling prices for an order from the Royal Golf Club. The club had requested quotes before deciding on their purchase. Morden wondered what his own company's (i.e., the manufacturer's) costs were for filling the order so that he could provide a competitive quote on the order. Treasure Trophy Company (Treasure) manufactured trophies for all kinds of sports, businesses and celebratory events. All trophies were made to order, sometimes for retail stores and sometimes directly for the organizers of the events. Several trophy manufacturers competed for this business, and since their capabilities were about the same, prices were set with reference to a fairly narrow competitive range. Treasure used a job order system of cost accumulation. The company did not use a standard cost system since its products were all customized. The manufacturing process was divided into three departments: forming, finishing and assembly. The raw materials were machined to make up finished parts in the forming department. In the finishing department, these parts were sanded, polished, lacquered or subjected to whatever other finishing operations the job required. Any engraving was done in the finishing department. The assembly operation involved joining parts together to form the trophy, which most commonly meant gluing. Decals might also be glued onto trophies in the finishing department, particularly in the case of less expensive trophies that had little or no engraving. The company's budgeted costs for the year 2014 are shown in Exhibit 1. A single supervisor oversaw all three departments. His responsibilities included scheduling orders, ensuring that schedules were met, and verifying that trophies were produced to specifications. The costs shown for shipping did not include any allocation of rent or light and heat. The entire factory building was rented. It had a floor area of 15,000 square feet. The forming department contained 4,000 square feet; the finishing and assembly departments each occupied 3,000 square feet, and the remainder of the building was used for offices, material storage, and shipping and receiving. The forming department had two machines, each rated at 15 horsepower, and the finishing department had two 10-horsepower machines. All work in the assembly department was done by hand. The machines in the forming department had originally cost $360,000, and the ones in the finishing department had cost $240,000. All machinery was depreciated over 10 years using the straight-line method with no estimated residual value. Insurance expense was calculated based on the historical cost of the machines. The best estimate for repairs expenses was based on the proportionate horsepower of the machines. No supplies were required for the forming department since all the material used was considered a direct material cost. Supplies expenses were roughly equal for the finishing and assembly departments. A job cost sheet was prepared by the supervisor for every order processed by the company. Exhibit 2 contains an incomplete job cost sheet for Job Order No. 35, which required 80 golfing trophies. The budgeted direct labour cost of $210,000 was made up of $56,000 for the forming department, $84,000 for the finishing department, and $70,000 for the assembly department. Exhibit 3 contains a cost assignment and allocation worksheet, which had recently been designed by the supervisor. Morden sat down to set a price for the Royal Golf Club order. To begin with, he wondered what Treasure's costs were for filling the order. As well, he was concerned about what factors should be taken into account in the pricing process and what price should be quoted on the order. EXHIBIT 1: BUDGETED COSTS FOR 2014 Direct labour $ 210,000 Direct material Supervision General manager's salary Supplies Shipping' Power Rent Light and heat Depreciation on machinery Insurance on machinery Repairs Selling expenses Administrative expenses 140,000 51,500 105,000 42,000 30,000 13,500 54,000 18,000 60,000 6,000 6,500 70,000 33,500 EXHIBIT 2: JOB COST SHEET Treasure Trophy Company Customer: Royal Golf Club Box 11258 Carstairs, Alberta Date: April 6, 2014 Job Order No.: 35 Order No. 3515 No. of Units: 80 Material Labour Rate Labour Overhead Department Cost Hours Cost Applied Total $ 301.00 $ 14.00 $ 140.00 Forming Finishing Assembly Total 10.0 15.0 21.00 315.00 17.50 10.0 35.0 175.00 $ 301.00 $ 630.00 1 Includes costs for shipping finished goods to customers only. EXHIBIT 3: ANNUAL COST ASSIGNMENT AND ALLOCATION WORKSHEET Total Forming Finishing Assembly Direct Costs Direct labour $ 210,000 Direct material 140.000 Total direct costs 350,000 Factory Overhead Costs Supervision 51.500 Supplies 42,000 Power 13.500 Rent 36,000 Light and heat 12.000 Depreciation, machinery 60,000 Insurance, machinery 6.000 Repairs 6,500 Total factory overhead costs 227.500 Administrative Costs General manager's salary 105.000 Shipping 30.000 Rent 18,000 Light and heat 6.000 Selling expenses 70,000 Administrative expenses 33.500 Total administrative expenses 262,500 Overhead Application Rates Factory overhead application rate (FOH expenses + Direct labour) Total overhead application rate (Total expenses - Direct labour) 1. Allocate manufacturing overhead to departments. Specific overhead items should be allocated on an individual basis when there is a logical basis for doing so. 2. Develop overhead application rates for the three departments on the basis of direct labor cost. 3. Complete the job cost sheet shown in case Exhibit 2 in order to get the total cost for the job based on the full costing method. 4. Calculate the cost of each of the two jobs using the direct costing method. 5. As Bob Morden, what factors would you consider before setting a firm quote for these two orders? 6. What price should Treasure Trophy Company be willing to quote for the Royal Golf Club? Bob Morden, Treasure Trophy Company's new general manager, was about to set the selling prices for an order from the Royal Golf Club. The club had requested quotes before deciding on their purchase. Morden wondered what his own company's (i.e., the manufacturer's) costs were for filling the order so that he could provide a competitive quote on the order. Treasure Trophy Company (Treasure) manufactured trophies for all kinds of sports, businesses and celebratory events. All trophies were made to order, sometimes for retail stores and sometimes directly for the organizers of the events. Several trophy manufacturers competed for this business, and since their capabilities were about the same, prices were set with reference to a fairly narrow competitive range. Treasure used a job order system of cost accumulation. The company did not use a standard cost system since its products were all customized. The manufacturing process was divided into three departments: forming, finishing and assembly. The raw materials were machined to make up finished parts in the forming department. In the finishing department, these parts were sanded, polished, lacquered or subjected to whatever other finishing operations the job required. Any engraving was done in the finishing department. The assembly operation involved joining parts together to form the trophy, which most commonly meant gluing. Decals might also be glued onto trophies in the finishing department, particularly in the case of less expensive trophies that had little or no engraving. The company's budgeted costs for the year 2014 are shown in Exhibit 1. A single supervisor oversaw all three departments. His responsibilities included scheduling orders, ensuring that schedules were met, and verifying that trophies were produced to specifications. The costs shown for shipping did not include any allocation of rent or light and heat. The entire factory building was rented. It had a floor area of 15,000 square feet. The forming department contained 4,000 square feet; the finishing and assembly departments each occupied 3,000 square feet, and the remainder of the building was used for offices, material storage, and shipping and receiving. The forming department had two machines, each rated at 15 horsepower, and the finishing department had two 10-horsepower machines. All work in the assembly department was done by hand. The machines in the forming department had originally cost $360,000, and the ones in the finishing department had cost $240,000. All machinery was depreciated over 10 years using the straight-line method with no estimated residual value. Insurance expense was calculated based on the historical cost of the machines. The best estimate for repairs expenses was based on the proportionate horsepower of the machines. No supplies were required for the forming department since all the material used was considered a direct material cost. Supplies expenses were roughly equal for the finishing and assembly departments. A job cost sheet was prepared by the supervisor for every order processed by the company. Exhibit 2 contains an incomplete job cost sheet for Job Order No. 35, which required 80 golfing trophies. The budgeted direct labour cost of $210,000 was made up of $56,000 for the forming department, $84,000 for the finishing department, and $70,000 for the assembly department. Exhibit 3 contains a cost assignment and allocation worksheet, which had recently been designed by the supervisor. Morden sat down to set a price for the Royal Golf Club order. To begin with, he wondered what Treasure's costs were for filling the order. As well, he was concerned about what factors should be taken into account in the pricing process and what price should be quoted on the order. EXHIBIT 1: BUDGETED COSTS FOR 2014 Direct labour $ 210,000 Direct material Supervision General manager's salary Supplies Shipping' Power Rent Light and heat Depreciation on machinery Insurance on machinery Repairs Selling expenses Administrative expenses 140,000 51,500 105,000 42,000 30,000 13,500 54,000 18,000 60,000 6,000 6,500 70,000 33,500 EXHIBIT 2: JOB COST SHEET Treasure Trophy Company Customer: Royal Golf Club Box 11258 Carstairs, Alberta Date: April 6, 2014 Job Order No.: 35 Order No. 3515 No. of Units: 80 Material Labour Rate Labour Overhead Department Cost Hours Cost Applied Total $ 301.00 $ 14.00 $ 140.00 Forming Finishing Assembly Total 10.0 15.0 21.00 315.00 17.50 10.0 35.0 175.00 $ 301.00 $ 630.00 1 Includes costs for shipping finished goods to customers only. EXHIBIT 3: ANNUAL COST ASSIGNMENT AND ALLOCATION WORKSHEET Total Forming Finishing Assembly Direct Costs Direct labour $ 210,000 Direct material 140.000 Total direct costs 350,000 Factory Overhead Costs Supervision 51.500 Supplies 42,000 Power 13.500 Rent 36,000 Light and heat 12.000 Depreciation, machinery 60,000 Insurance, machinery 6.000 Repairs 6,500 Total factory overhead costs 227.500 Administrative Costs General manager's salary 105.000 Shipping 30.000 Rent 18,000 Light and heat 6.000 Selling expenses 70,000 Administrative expenses 33.500 Total administrative expenses 262,500 Overhead Application Rates Factory overhead application rate (FOH expenses + Direct labour) Total overhead application rate (Total expenses - Direct labour) 1. Allocate manufacturing overhead to departments. Specific overhead items should be allocated on an individual basis when there is a logical basis for doing so. 2. Develop overhead application rates for the three departments on the basis of direct labor cost. 3. Complete the job cost sheet shown in case Exhibit 2 in order to get the total cost for the job based on the full costing method. 4. Calculate the cost of each of the two jobs using the direct costing method. 5. As Bob Morden, what factors would you consider before setting a firm quote for these two orders? 6. What price should Treasure Trophy Company be willing to quote for the Royal Golf Club? Bob Morden, Treasure Trophy Company's new general manager, was about to set the selling prices for an order from the Royal Golf Club. The club had requested quotes before deciding on their purchase. Morden wondered what his own company's (i.e., the manufacturer's) costs were for filling the order so that he could provide a competitive quote on the order. Treasure Trophy Company (Treasure) manufactured trophies for all kinds of sports, businesses and celebratory events. All trophies were made to order, sometimes for retail stores and sometimes directly for the organizers of the events. Several trophy manufacturers competed for this business, and since their capabilities were about the same, prices were set with reference to a fairly narrow competitive range. Treasure used a job order system of cost accumulation. The company did not use a standard cost system since its products were all customized. The manufacturing process was divided into three departments: forming, finishing and assembly. The raw materials were machined to make up finished parts in the forming department. In the finishing department, these parts were sanded, polished, lacquered or subjected to whatever other finishing operations the job required. Any engraving was done in the finishing department. The assembly operation involved joining parts together to form the trophy, which most commonly meant gluing. Decals might also be glued onto trophies in the finishing department, particularly in the case of less expensive trophies that had little or no engraving. The company's budgeted costs for the year 2014 are shown in Exhibit 1. A single supervisor oversaw all three departments. His responsibilities included scheduling orders, ensuring that schedules were met, and verifying that trophies were produced to specifications. The costs shown for shipping did not include any allocation of rent or light and heat. The entire factory building was rented. It had a floor area of 15,000 square feet. The forming department contained 4,000 square feet; the finishing and assembly departments each occupied 3,000 square feet, and the remainder of the building was used for offices, material storage, and shipping and receiving. The forming department had two machines, each rated at 15 horsepower, and the finishing department had two 10-horsepower machines. All work in the assembly department was done by hand. The machines in the forming department had originally cost $360,000, and the ones in the finishing department had cost $240,000. All machinery was depreciated over 10 years using the straight-line method with no estimated residual value. Insurance expense was calculated based on the historical cost of the machines. The best estimate for repairs expenses was based on the proportionate horsepower of the machines. No supplies were required for the forming department since all the material used was considered a direct material cost. Supplies expenses were roughly equal for the finishing and assembly departments. A job cost sheet was prepared by the supervisor for every order processed by the company. Exhibit 2 contains an incomplete job cost sheet for Job Order No. 35, which required 80 golfing trophies. The budgeted direct labour cost of $210,000 was made up of $56,000 for the forming department, $84,000 for the finishing department, and $70,000 for the assembly department. Exhibit 3 contains a cost assignment and allocation worksheet, which had recently been designed by the supervisor. Morden sat down to set a price for the Royal Golf Club order. To begin with, he wondered what Treasure's costs were for filling the order. As well, he was concerned about what factors should be taken into account in the pricing process and what price should be quoted on the order. EXHIBIT 1: BUDGETED COSTS FOR 2014 Direct labour $ 210,000 Direct material Supervision General manager's salary Supplies Shipping' Power Rent Light and heat Depreciation on machinery Insurance on machinery Repairs Selling expenses Administrative expenses 140,000 51,500 105,000 42,000 30,000 13,500 54,000 18,000 60,000 6,000 6,500 70,000 33,500 EXHIBIT 2: JOB COST SHEET Treasure Trophy Company Customer: Royal Golf Club Box 11258 Carstairs, Alberta Date: April 6, 2014 Job Order No.: 35 Order No. 3515 No. of Units: 80 Material Labour Rate Labour Overhead Department Cost Hours Cost Applied Total $ 301.00 $ 14.00 $ 140.00 Forming Finishing Assembly Total 10.0 15.0 21.00 315.00 17.50 10.0 35.0 175.00 $ 301.00 $ 630.00 1 Includes costs for shipping finished goods to customers only. EXHIBIT 3: ANNUAL COST ASSIGNMENT AND ALLOCATION WORKSHEET Total Forming Finishing Assembly Direct Costs Direct labour $ 210,000 Direct material 140.000 Total direct costs 350,000 Factory Overhead Costs Supervision 51.500 Supplies 42,000 Power 13.500 Rent 36,000 Light and heat 12.000 Depreciation, machinery 60,000 Insurance, machinery 6.000 Repairs 6,500 Total factory overhead costs 227.500 Administrative Costs General manager's salary 105.000 Shipping 30.000 Rent 18,000 Light and heat 6.000 Selling expenses 70,000 Administrative expenses 33.500 Total administrative expenses 262,500 Overhead Application Rates Factory overhead application rate (FOH expenses + Direct labour) Total overhead application rate (Total expenses - Direct labour) 1. Allocate manufacturing overhead to departments. Specific overhead items should be allocated on an individual basis when there is a logical basis for doing so. 2. Develop overhead application rates for the three departments on the basis of direct labor cost. 3. Complete the job cost sheet shown in case Exhibit 2 in order to get the total cost for the job based on the full costing method. 4. Calculate the cost of each of the two jobs using the direct costing method. 5. As Bob Morden, what factors would you consider before setting a firm quote for these two orders? 6. What price should Treasure Trophy Company be willing to quote for the Royal Golf Club? Bob Morden, Treasure Trophy Company's new general manager, was about to set the selling prices for an order from the Royal Golf Club. The club had requested quotes before deciding on their purchase. Morden wondered what his own company's (i.e., the manufacturer's) costs were for filling the order so that he could provide a competitive quote on the order. Treasure Trophy Company (Treasure) manufactured trophies for all kinds of sports, businesses and celebratory events. All trophies were made to order, sometimes for retail stores and sometimes directly for the organizers of the events. Several trophy manufacturers competed for this business, and since their capabilities were about the same, prices were set with reference to a fairly narrow competitive range. Treasure used a job order system of cost accumulation. The company did not use a standard cost system since its products were all customized. The manufacturing process was divided into three departments: forming, finishing and assembly. The raw materials were machined to make up finished parts in the forming department. In the finishing department, these parts were sanded, polished, lacquered or subjected to whatever other finishing operations the job required. Any engraving was done in the finishing department. The assembly operation involved joining parts together to form the trophy, which most commonly meant gluing. Decals might also be glued onto trophies in the finishing department, particularly in the case of less expensive trophies that had little or no engraving. The company's budgeted costs for the year 2014 are shown in Exhibit 1. A single supervisor oversaw all three departments. His responsibilities included scheduling orders, ensuring that schedules were met, and verifying that trophies were produced to specifications. The costs shown for shipping did not include any allocation of rent or light and heat. The entire factory building was rented. It had a floor area of 15,000 square feet. The forming department contained 4,000 square feet; the finishing and assembly departments each occupied 3,000 square feet, and the remainder of the building was used for offices, material storage, and shipping and receiving. The forming department had two machines, each rated at 15 horsepower, and the finishing department had two 10-horsepower machines. All work in the assembly department was done by hand. The machines in the forming department had originally cost $360,000, and the ones in the finishing department had cost $240,000. All machinery was depreciated over 10 years using the straight-line method with no estimated residual value. Insurance expense was calculated based on the historical cost of the machines. The best estimate for repairs expenses was based on the proportionate horsepower of the machines. No supplies were required for the forming department since all the material used was considered a direct material cost. Supplies expenses were roughly equal for the finishing and assembly departments. A job cost sheet was prepared by the supervisor for every order processed by the company. Exhibit 2 contains an incomplete job cost sheet for Job Order No. 35, which required 80 golfing trophies. The budgeted direct labour cost of $210,000 was made up of $56,000 for the forming department, $84,000 for the finishing department, and $70,000 for the assembly department. Exhibit 3 contains a cost assignment and allocation worksheet, which had recently been designed by the supervisor. Morden sat down to set a price for the Royal Golf Club order. To begin with, he wondered what Treasure's costs were for filling the order. As well, he was concerned about what factors should be taken into account in the pricing process and what price should be quoted on the order. EXHIBIT 1: BUDGETED COSTS FOR 2014 Direct labour $ 210,000 Direct material Supervision General manager's salary Supplies Shipping' Power Rent Light and heat Depreciation on machinery Insurance on machinery Repairs Selling expenses Administrative expenses 140,000 51,500 105,000 42,000 30,000 13,500 54,000 18,000 60,000 6,000 6,500 70,000 33,500 EXHIBIT 2: JOB COST SHEET Treasure Trophy Company Customer: Royal Golf Club Box 11258 Carstairs, Alberta Date: April 6, 2014 Job Order No.: 35 Order No. 3515 No. of Units: 80 Material Labour Rate Labour Overhead Department Cost Hours Cost Applied Total $ 301.00 $ 14.00 $ 140.00 Forming Finishing Assembly Total 10.0 15.0 21.00 315.00 17.50 10.0 35.0 175.00 $ 301.00 $ 630.00 1 Includes costs for shipping finished goods to customers only. EXHIBIT 3: ANNUAL COST ASSIGNMENT AND ALLOCATION WORKSHEET Total Forming Finishing Assembly Direct Costs Direct labour $ 210,000 Direct material 140.000 Total direct costs 350,000 Factory Overhead Costs Supervision 51.500 Supplies 42,000 Power 13.500 Rent 36,000 Light and heat 12.000 Depreciation, machinery 60,000 Insurance, machinery 6.000 Repairs 6,500 Total factory overhead costs 227.500 Administrative Costs General manager's salary 105.000 Shipping 30.000 Rent 18,000 Light and heat 6.000 Selling expenses 70,000 Administrative expenses 33.500 Total administrative expenses 262,500 Overhead Application Rates Factory overhead application rate (FOH expenses + Direct labour) Total overhead application rate (Total expenses - Direct labour) 1. Allocate manufacturing overhead to departments. Specific overhead items should be allocated on an individual basis when there is a logical basis for doing so. 2. Develop overhead application rates for the three departments on the basis of direct labor cost. 3. Complete the job cost sheet shown in case Exhibit 2 in order to get the total cost for the job based on the full costing method. 4. Calculate the cost of each of the two jobs using the direct costing method. 5. As Bob Morden, what factors would you consider before setting a firm quote for these two orders? 6. What price should Treasure Trophy Company be willing to quote for the Royal Golf Club?
Expert Answer:
Answer rating: 100% (QA)
Total forming Dioret Cast Divot labour Diret Matori... View the full answer
Related Book For
Statistics The Art and Science of Learning from Data
ISBN: 978-0321755940
3rd edition
Authors: Alan Agresti, Christine A. Franklin
Posted Date:
Students also viewed these accounting questions
-
James borrows $12,000 for equipment so that he could do some of his personal training work in his garage. He agreed to repay $13,200 after 300 days. Find the amount of interest and the interest rate
-
A sports manufacturer has developed a new golf ball with special dimples that it hopes will cause the ball to travel farther than standard golf balls. This question is examined by asking 24 golfers...
-
Golf Mart is a retail sports store carrying golf apparel and equipment. The store is at the end of its second year of operation and is struggling. A major problem is that its cost of inventory has...
-
ABC Corporation purchased a residential property for the use of its Accounting Manager. The property is payable over 12 annual installments of P275,000 including interest but have a cash price of...
-
In September 2013, the Pew Internet and American Life Project surveyed American adults on their Face book use. It found that 64% visited the site on a daily basis, up from 51 % in 2010. What does it...
-
Using your estimates from Problem 8 and the fact that the correlation of A and B is 0.48, calculate the volatility (standard deviation) of a portfolio that is 70% invested in stock A and 30% invested...
-
A large company has the opportunity to select one of seven projects-A, B, C, D, E, F, G-or choose the null (donothing) alternative. Each project requires a single initial investment as shown in the...
-
Schultz Electronics manufactures two large-screen television models: the Royale which sells for $1,600, and a new model, the Majestic, which sells for $1,300. The production cost computed per unit...
-
If then A-1: = A 0 ^= [1791] X.
-
Consider the 2013 declined loan data from LendingClub titled RejectStatsB2013 from the Connect website. Similar to the analysis done in the chapter, lets scrub the risk score data. First, because our...
-
For a single product manufacturing company, all overhead must be assigned to one product. Since this is the case, why would such a firm not simply assign actual overhead cost to production as it is...
-
In terms of influencing organizational effectiveness, since groups are composed of individuals, is group behavior really any different than individual behavior? Why or why not? How do or how would...
-
A house is 52.0 ft long and 34.0 ft wide and has 8.0-ft-high ceilings. What is the volume of the interior of the house in cubic meters and cubic centimeters? m3 cm
-
(a) Write 13.8% as a decimal. (b) Write 0.2 as a percentage. (a) 13.8% = 7 (b) 0.2 =% X S
-
Robin Rinehart summarizes the three compositions relating to the Goddess Candi in the Dasam Granth. Identify and explain one way in which Rinehart links these tales to Sikh teaching.
-
A house is 60.0 ft long and 42.0 ft wide and has 8.0-ft-high ceilings. What is the volume of the interior of the house in cubic meters and cubic centimeters? m cm Submit Answer
-
The figure shows are 19.4 cm long. A 0 E a rhombus whose sides The angle is 23.4. B C D Find the distance from A to B. Answer in units of
-
What is an access control list?
-
The last four teams of the Southeast region of the 2011 NCAA Mens Basketball Tournament were Butler (located in Indiana), Brigham Young University (located in Utah), Florida, and Wisconsin. The...
-
The owner of a company in downtown Atlanta is concerned about the large use of gasoline by her employees due to urban sprawl, traffic congestion, and the use of energy inefficient vehicles such as...
-
Youd like to estimate the proportion of all students in your school who are fluent in more than one language. You poll a random sample of 50 students and get a sample proportion of 0.12. Explain why...
-
Nina Lopez and Matt ORourke have been trying to raise capital to expand their growing chain of cupcake shops, Treasure Cup. They make a full range of traditional cupcakes, but they found immediate...
-
Wish You Wood is a toy boutique located in the main shopping strip of a resort town near Piney Lake. People who own cabins near the lake or come to visit the local state park enjoy browsing through...
-
Alyssia Franklin is a marketing manager for Or Earth Skin Care. Four years ago, when she was hired to help with promotional campaigns, she was thrilled because she loved Or Earths products. Above all...
Study smarter with the SolutionInn App