Fill in each blank space with the missing answer Place the missing word to complete the following statement about transmission oil pressure test using the following words. Missing Words: forward, gauges, indicated, individual, lower, measures, models, positions, pressure, tested, three, usually If you cannot identify the cause of a transmission problem from your inspection or road test, a Select... test should be conducted. This test Select... the fluid pressure of the different transmission circuits during the various operating gears and gear selector Select... . The number of hydraulic circuits that can be Select... varies with the different makes and Select... of transmissions. The test is best conducted with Select... pressure gauges, but two will work. Two of the Select... should read up to 400 psi (28 kg/cm2) and the other to 100 psi (7 kg/cm2). The two 400 psi (28 kg/cm2) gauges are Select... used to check mainline and an Select... circuit, such as mainline and direct or Select... circuits. If a circuit is 15 psi (1 kg/cm2) Select... than mainline pressure when they are both tested at exactly the same time, a leak is Select... . A 100 psi (7 kg/cm2) gauge may be used be used on TV and governor circuits