(a) Gaseous hydrogen at a constant pressure of 0.658 MPa (5 atm) is to flow within the inside of a thin-walled cylindrical tube of nickel that has a radius of 0.125 m. The temperature of the tube is to be 350°C and the pressure of hydrogen outside of the tube will be maintained at 0.0127 MPa (0.125 atm). Calculate the minimum wall thickness if the diffusion flux is to be no greater than 1.25 × 10-7mol/m2.s. The concentration of hydrogen in the nickel, CH (in moles hydrogen per cubic meter of Ni), is a function of hydrogen pressure, PH2 (in MPa), and absolute temperature T according to

Furthermore, the diffusion coefficient for the diffusion of H in Ni depends on temperature as

(b) For thin-walled cylindrical tubes that are pressurized, the circumferential stress is a function of the pressure difference across the wall (Δp), cylinder radius (r), and tube thickness (x) according to Equation 6.25-that is

Compute the circumferential stress to which the walls of this pressurized cylinder are exposed.
(The symbol t is used for cylinder wall thickness in Equation 6.25 found in Design Example 6.2; in this version of Equation 6.25 (i.e., 6.25a) we denote wall thickness by x.)
(c) The room-temperature yield strength of Ni is 100 MPa (15,000 psi), and σy diminishes about 5 MPa for every 50°C rise in temperature. Would you expect the wall thickness computed in part (b) to be suitable for this Ni cylinder at 350°C? Why or why not?
(d) If this thickness is found to be suitable, compute the minimum thickness that could be used without any deformation of the tube walls. How much would the diffusion flux increase with this reduction in thickness? However, if the thickness determined in part (c) is found to be unsuitable, then specify a minimum thickness that you would use. In this case, how much of a decrease in diffusion flux would result?

Transcribed Image Text:

Yield Strength, Oy Unit Mass Cost, T Alloy Density, p (g/cm3) (SUS/kg) (MPa) Steel (plain) 375 7.8 1.65 Steel (alloy) 1000 7.8 4.00 Cast iron 225 7.1 2.50 Aluminum 275 2.7 7.50 1.80 Magnesium 175 15.00 Alloy Yield Strength, Oy Density, p Unit Mass Cost, T (MPa) (g/cm3) (SUS/kg) Steel (plain) 375 7.8 1.65 Steel (alloy) 1000 7.8 4.00 Cast iron 225 7.1 2.50 Aluminum 275 2.7 7.50 Magnesium 175 1.80 15.00