Question: Consider a heat pump that operates on the reversed Carnot cycle with R-134a as the working fluid executed under the saturation dome between the pressure

Consider a heat pump that operates on the reversed Carnot cycle with R-134a as the working fluid executed under the saturation dome between the pressure limits of 140 and 800 kPa. R-134a changes from saturated vapor to saturated liquid during the heat rejection process. The net work input for this cycle is
(a) 28kJ/kg
(b) 34kJ/kg
(c) 49kJ/kg
(d) 144kJ/kg
(e) 275kJ/kg

Step by Step Solution

★★★★★

3.52 Rating (172 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

a 28kJkg Solved by EES Software Solutions can be verified by c... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

837-ME-T (5878).docx

120 KBs Word File

Students Have Also Explored These Related Mechanical Engineering Questions!

Consider a heat pump that operates on the ideal vapor compression refrigeration cycle with R-134a as the working fluid between the pressure limits of 0.32 and 1.2 MPa. The coefficient of performance...

Consider a heat pump that operates on the ideal vapor-compression refrigeration cycle with R-134a as the working fluid between the pressure limits of 0.24 and 1.2 MPa. The coefficient of performance...

A heat pump that operates on the ideal vapor compression cycle with refrigerant-134a is used to heat a house and maintain it at 75F by using underground water at 50F as the heat source. The house is...

Consider a steady-flow Carnot cycle with water as the working fluid executed under the saturation dome between the pressure limits of 8 MPa and 20 kPa. Water changes from saturated liquid to...

Consider a Carnot cycle executed in a closed system with air as the working fluid. The maximum pressure in the cycle is 1300kPa while the maximum temperature is 950K. If the entropy increase during...

Show me the steps to solve including using the property table. The interior space of a building in winter is to be heated by a heat pump to maintain the internal temperature at 2 2 . 0 C . The 5 5 ....

Question 5 Question 1 An ideal Brayton cycle, operating between the pressure limits of 1 bar and 6 bar, has minimum and maximum temperatures of 300 K and 1500 K. The ratio of specific heats of the...

Consider a Carnot cycle executed in a closed system with air as the working fluid. The maximum pressure in the cycle is 800 kPa while the maximum temperature is 750 K. If the entropy increase during...

What is converged retailing? Why have many retailers not adopted it yet?

Youre on a special diet and know that your daily requirement of five nutrients is 60 milligrams of vitamin C, 1,000 milligrams of calcium, 18 milligrams of iron, 20 milligrams of niacin, and 360...

15. Which of the following changes needs heating? (a) gas to liquid (b) solid to liquid (c) liquid to solid (d) gas to solid

What are the steps in developing a career path?

A vertical cylinder fitted with a piston contains 5 kg of R-22 at 10C. Heat is transferred to the system, causing the piston to rise until it reaches a set of stops at which point the volume has...

A piston/cylinder contains 1 kg of liquid water at 20C and 300 kPa. Initially the piston floats, similar to the setup in Problem 4.64, with a maximum enclosed volume of 0.002 m3 if the piston touches...

Refrigerant-12 is contained in a piston/cylinder arrangement at 2 MPa, 150C with a mass less piston against the stops, at which point V = 0.5 m3. The side above the piston is connected by an open...

In a survey of 1,100 organizations, 840 responded that "the need for collaboration among an increasing number of locations" is a business driver that led them to implement cloud solutions. Construct...

Math134 F21 Marques Wood Test: Exam(1) Question 13 This Test: 80 pts possible A certain standardized test's math scores have a bell-shaped distribution with a mean of 520 and a standard deviation of...

Sloan Transmissions, Inc., has the following estimates for its new gear assembly project: price = $1,300 per unit; variable costs = $260 per unit; fixed costs = $4.8 million, quantity = 72,000 units....