In a refrigeration system, would you recommend condensing the refrigerant-134a at a pressure of 0.7 or 1.0

Question:

In a refrigeration system, would you recommend condensing the refrigerant-134a at a pressure of 0.7 or 1.0 MPa if heat is to be rejected to a cooling medium at 15oC? Why?

Fantastic news! We've Found the answer you've been seeking!

Step by Step Answer:

Related Book For book-img-for-question

Thermodynamics An Engineering Approach

ISBN: 978-0073398174

8th edition

Authors: Yunus A. Cengel, Michael A. Boles

See More Books

Question Posted: Apr 01, 2016 05:31 AM

See More Questions

Heat is to be removed from a reaction vessel operating at 75C by supplying water at 27C and 0.12 kg/s through a thin-walled tube of 15-mm diameter. The convection coefficient between the tube outer...
Heat is to be transferred from water to air through an aluminum wall. It is proposed to add rectangular fins 0.05-in. thick and 3/4-in. long spaced 0.08 in. apart to the aluminium surface to aid in...
Heat is to be conducted along a circuit board that has a copper layer on one side. The circuit board is 15 cm long and 15 cm wide, and the thicknesses of the copper and epoxy layers are 0.1 mm and...
Cindy Bagnal, the manager of Cayce Printing Service, has provided you with the following aging schedule for Cayce's accounts receivable: Cindy indicates that the $126,700 of accounts receivable...
On January 1, 2014, when the market interest rate was 14%, Luba Corporation issued bonds in the face amount of $500,000 with interest at 12% payable semiannually. The bonds mature on December 31,...
Which of the following best describes the meaning of 'Purchases'? (A) Items bought (B) Goods bought on time (C) Goods bought for resale (D) Goods paid for
Consider the kinematic viscosity data in Table B.10. a. Perform a thorough residual analysis of these data. b. Identify the most appropriate transformation for these data. Fit this model and repeat...
You plan to open a small business for manufacturing pet collars, leashes, and harnesses. You have found a workshop space you can use for sewing your products. After some research and planning, you...
How do emergent structures, characterized by self-organizing principles and distributed decision-making authority, challenge traditional hierarchical models of organizational governance and redefine...
How do you calculate the percentage of change in sales from 20X8 to 20X9? This will go in cell D7? Show the formula. Kretsmart Common-Size Income Statements For the Years Ended December 31, 20'X'9,...
An ideal gas refrigeration cycle using air as the working fluid is to maintain a refrigerated space at - 23oC while rejecting heat to the surrounding medium at 27oC. If the pressure ratio of the...
Air enters the compressor of an ideal gas refrigeration cycle at 7oC and 35 kPa and the turbine at 37oC and 160 kPa. The mass flow rate of air through the cycle is 0.2 kg/s. Assuming variable...
The open loop transfer function of a unity feedback control system is given as $\mathrm{G}(s)=\frac{a s+1}{s^{2}}$. The value of ' $a$ ' to give a phase margin of $45^{\circ}$ is equal to (a)...
1. Adsorption Equilibrium. Experimental equilibrium data for the adsorption of methane on Calgon Carbon Corp. PCB activated carbon are listed in table below. Determine if the Langmuir isotherm is a...
a) Consider the two-dimensional velocity vector fields: V = [-y, x, 0] V = [2,-1,0] Evaluate the vector components of V and V using at least four points per field. Sketch the streamlines of each flow...
The height of the bolt head used on a ship is "h(cm)" and the safe tension of a bolt with a bolt diameter of "d(cm)" is Tsafe (kg/cm). Find the force (Psafe) that can be applied to the bolt....
19.2. A chemistry lab contains an eye wash station as shown in the figure. Water flows steadily through the eye wash station, entering at Point 1 and exiting at outlets 2 and 3. The system is...
If the breaking strength of the bolt used on a ship is omax (kg/cm), the safety coefficient is "EKS" and the safe carrying force is "Psafe", what should be the diameter of the bolt that we want it to...
Working in groups of three or four, design an experiment to determine whether pulse rates of college students are the same while the students are standing and sitting. Conduct the experiment and...
A handrail, which weighs 120 N and is 1.8 m long. was mounted to a wall adjacent to a small set of steps (Figure P4.26). The support at A has broken, and the rail has fallen about the loose bolt at 8...
A diffuser receives an ideal gas flow at 100 kPa, 300 K with a velocity of 250 m/s and the exit velocity is 25 m/s. Determine the exit temperature if the gas is argon, helium or nitrogen.
Air flows into a diffuser at 300 m/s, 300 K and 100 kPa. At the exit the velocity is very small but the pressure is high. Find the exit temperature assuming zero heat transfer.
The front of a jet engine acts as a diffuser receiving air at 900 km/h, -5C, 50 kPa, bringing it to 80 m/s relative to the engine before entering the compressor. If the flow area is reduced to 80% of...
Watch the recorded interview of Ms . Veronica Trammell, Executive Director of Learning Technology at KSU. The interview focused on service management and service operation. Share your thoughts in...
develop a detailed event plan following the assigned event type and theme with the following information: Event objectives based on the assigned event type and theme Two sets of varying food &...
Provide a detailed simulation performance results for Walmart inc. based on 5 year performance review.

In a refrigeration system, would you recommend condensing the refrigerant-134a at a pressure of 0.7 or 1.0

Question:

Step by Step Answer:

To Conclude I can say that allowing a temperature diff...View the full answer

Thermodynamics An Engineering Approach

Students also viewed these Mechanical Engineering questions