Question: 1. Complete the configurations based on the following given information. Fill in the IP Address and subnets in the table. 2. Configure a static routing

1. Complete the configurations based on the following given information. Fill in the IP Address and subnets in the table. 2. Configure a static routing to allow connections between nodes on RouterA and RouterB networks. 3. Configure Router A to be the DHCP server that would only assign IP addresses to devices on Gig0/1 interface (PCO and PC1 only) Addressing Table Fall PC4 IP Address description Serverad Device Interface IP Address Subnet Mask Fa0/2 TA/ F3 Switch RouterA G0/0 G900 Fall Gig02 Gold G90/2 G0/1 Gign Got 10.10.10.0/26 - Last usable address 10.10.20.0/26 - Last usable address 10.10.30.0/30 - First usable address 10.10.20.0/26 Router ROB 2:01 Fall! G0/2 F02 Aatra facht PC-0 NIC 2 10.10.20.0/26 PC-1 NIC Fall FO 10.10.10.0/26 - First usable address PCI Server NIC 202 PCO Assessment: RouterB G0/0 10.100.0.0/23 - Last usable address 10.200.0.0/23 - Last usable address Topology Setup 5 G0/1 Static Routing 5 G0/2 DHCP 5 10.10.30.0/30 - Last usable address 10.100.0.0/23 - First usable address Addressing Table 5 PC-3 NIC TOTAL 20 10.100.0.0/23 - Second usable address PC-4 NIC 10.200.0.0/23 - First usable address PC-2 NIC
Step by Step Solution
There are 3 Steps involved in it
Get step-by-step solutions from verified subject matter experts
