13. 15. 16. On an MDF what is the minimum area required in front of the...

Transcribed Image Text:

13. 15. 16. On an MDF what is the minimum area required in front of the terminals for installation and maintenance purposes? a. 1000 mm x 1000 mm b. 1000 mm x 900 mm c. 500 mm x 500 mm d. 900 mm x 900 mm An MDF should be located in; a. a secure location requiring a key to access and exit b. a fire escape stairwell c. any location that the customer requires d. the same building as the end-user, near the main or first electrical switchboard Cross connection on the carrier side of the MDF; a. can only be performed by the carrier b. can be performed by the cabler or the customer c. can be performed by the cabler if the carrier has tagged the pair d. can be performed by the cabler if the carrier has disconnected the service For the network boundary enclosure, the minimum clearance between any enclosed termination equipment on the lead-in cable and the inside face of the cover or door is? a. 150 mm b. 50 mm C. 80 mm d. 30 mm Where on an NTD is a cabler permitted to perform cabling work? a. The carriers' lead-in termination b. The customer side terminations c. Both the carrier and customer terminations d. The cabler is not permitted to perform cabling work in an NTD 13. 15. 16. On an MDF what is the minimum area required in front of the terminals for installation and maintenance purposes? a. 1000 mm x 1000 mm b. 1000 mm x 900 mm c. 500 mm x 500 mm d. 900 mm x 900 mm An MDF should be located in; a. a secure location requiring a key to access and exit b. a fire escape stairwell c. any location that the customer requires d. the same building as the end-user, near the main or first electrical switchboard Cross connection on the carrier side of the MDF; a. can only be performed by the carrier b. can be performed by the cabler or the customer c. can be performed by the cabler if the carrier has tagged the pair d. can be performed by the cabler if the carrier has disconnected the service For the network boundary enclosure, the minimum clearance between any enclosed termination equipment on the lead-in cable and the inside face of the cover or door is? a. 150 mm b. 50 mm C. 80 mm d. 30 mm Where on an NTD is a cabler permitted to perform cabling work? a. The carriers' lead-in termination b. The customer side terminations c. Both the carrier and customer terminations d. The cabler is not permitted to perform cabling work in an NTD

Answer rating: 100% (QA)

The detailed answer for the above question is provided below 12The minimum area required in front of the terminals on an MDF Main Distribution Frame for installation and maintenance purposes can vary ... View the full answer