2 Assuming that are array is already defined and allocated in memory, its base address is ready stored in Sa1 and its number of elements in Sa2 answer each of the next questions as ruired are byte Ox99,0x200x73.0x400x500x69. # 80 lament Please write question numbers and answer parts in this question in order Q1) The tenth element of arrB is located at HEX address Q2) Write one MIPS Instruction to copy into 5t6 the value of tenth element arre Q3) Write one MIPS instruction to calculate: $14 - 16 tenth elemento 04) Write NO more than 3 MIPS Instructions to double the tenth element arrB: Q5) Write no more than 6 instructions to calculate $t8 = first element + last element in a ot Assume that arrB array is already defined and allocated in memory, its base address and its rumber of elements are already stored in sa1 and Sa2 correspondingly. Answer each of the next questions as required. Questions are independent. arB: .byte Ox99, 0x20,0x73, 0x40,0x500x69... Please write question numbers and answer parts in this question in order. Q1) Write no more than 7 MIPS instructions to calculate Sa3 if (arrB[9arrB[32] ) $a 3 - arB[91-arrB[32]: else Sa3 = arrB[32) - arr[9 Q2) Write no more than 12 MIPS instructions that arranges in descending order the neighboring elements in every pair of arr. For example, if arrB={2,5,8,20,30,15.....7,9), then after executing your code arrB becomes {5, 2, 20,8,30,15,...,9.7)