Question: 2) Water at 25C is flowing through a reducing bend, where a, is 120. the inlet pipe diameter is 3.658 m, the outlet is 2.438

2) Water at 25C is flowing through a reducing bend, where a, is 120. the inlet pipe diameter is 3.658 m, the outlet is 2.438 m, and the flow rate is 17 m/s. the exit point Zz is 3.05 m above the inlet and the inlet pressure is 176 kPa gage. Friction 0.5v losses are estimated as and the mass of water in the elbow is 16950 kg. Calculate the forces R, and R, and the resultant force on the control volume fluid. 2 2 12. P2 Ry a 2 1. P1 "L Rx

Step by Step Solution

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock blur-text-image

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Students Have Also Explored These Related Chemical Engineering Questions!

Water is flowing at steady state and room temperature at a rate of 0 . 0 5 6 6 m 3 / s through a 6 0 deg reducing bend ( 6 0 deg ) shown below. The inlet pipe diameter is 0 . 1 0 1 6 m and the outlet...

Water at 40C is flowing through a reducing bend, where 2 is 135. The fluid enters the bend at a rate of 7.35 m3 /s and exits 4.55 m above the inlet point. The inlet pipe diameter is 1.565 m while the...

1. Water at 93.3C is being pumped from a large storage tank at 1atm abs at a rate of 0.189m3/min by a pump. The motor that drives the pump supplies energy to the pump at a rate of 1.49kW. The water...

5-43C Consider an adiabatic turbine operating steadily. Does the work output of the turbine have to be equal to the decrease in the energy of the steam flowing through it? 5-44C Consider an air...

Forces on Reducing Bend. Water is flowing at steady state and 363 K at a rate of 0.0566 m/s through a 60 reducing bend (a2 = 60) in fig below. The inlet pipe diameter is 0.1016 m and the outlet...

A food factory uses hot water to wash and clean foods. The drained water, which has a mass flow rate of 0.1 kg/s, still have a temperature of 62C. Consider a concept design solution of waste heat...

Name: 7) Water enters the bent pipe horizontally at a volume flow rate of 0.25 m/s and inlet pressure of 60 kPa. The pipe at the inlet has diameter D=0.4 m and at the outlet D, 0.25 m. Ignoring...

( a ) A 7 . 5 c m diameter fire hose is maintained at a gauge pressure of P 0 by a fire engine pumping water. There is a nozzle at the end of the hose, reducing the diameter down to 3 . 5 c m . The...

Water is flowing through a pipe of diameter 0 . 1 2 5 m made of cast iron. The mass flow rate of the water is 2 5 k g s ( a ) Calculate the Reynolds number of the flow. ( b ) Calculate the pressure...

EFG Inc. is a calendar year corporation. EFG had current earnings and profits of $100,000 and no accumulated earnings and profits when it distributed a total of $160,000 to its two equal...

Refer to the information given in Exercise 10.17. Test at a 5% significance level if the two population means are different. n1 = 21 1 = 13.97 s1 = 3.78 n2 = 20 2 = 15.55 s1 = 3.26

Brief Exercise 9-24 Preparing a Direct Labor Budget Patrick Inc. makes industrial solvents. Planned production in units for the first 3 months of the coming year is: January 43,800 February 41,000...

thanks. 1. Go to www.glowscript.com www.glowscript.com, login, create a new progran, and write a Vpython program that displays the following three objects An object called sphere1 located at m. An...

Identify advertisements that do a good job of facilitating learning and ones that do not, and discuss why.

Why is it important to pre-test message executions?

Develop a creative brief for the introduction of a new healthier carbonated soft drink.