3-10. A tension test was performed on a steel specimen having an original diameter of 0.503...

Transcribed Image Text:

3-10. A tension test was performed on a steel specimen having an original diameter of 0.503 in. and gage length of 2.00 in. The data is listed in the table. Plot the stress-strain diagram and determine approximately the modulus of elasticity, the yield stress, the ultimate stress, and the fracture stress. In order to see the plot clearly, plot it on a new page and use the following scale: For vertical axis (stress): 1 unit = 2.5 ksi For horizontal axis (strain): 1 unit = 0.001 in/in for 0.005 in/in and 1 unit = 0.01 in/in for 0.005 in/in Note: 1. Gage length is the same as original length 2. The table gives values of load (tension force) and deformation (elongation) measured by the testing machine- you need to convert these values to nominal/engineering stress and nominal/engineering strain to plot the conventional stress-strain diagram. Load (kip) Elongation (in.) 0 0 1.50 0.0005 4.60 0.0015 8.00 0.0025 11.00 0.0035 11.80 0.0050 11.80 0.0080 12.00 0.0200 16.60 0.0400 20.00 0.1000 21.50 0.2800 19.50 0.4000 18.50 0.4600 3-10. A tension test was performed on a steel specimen having an original diameter of 0.503 in. and gage length of 2.00 in. The data is listed in the table. Plot the stress-strain diagram and determine approximately the modulus of elasticity, the yield stress, the ultimate stress, and the fracture stress. In order to see the plot clearly, plot it on a new page and use the following scale: For vertical axis (stress): 1 unit = 2.5 ksi For horizontal axis (strain): 1 unit = 0.001 in/in for 0.005 in/in and 1 unit = 0.01 in/in for 0.005 in/in Note: 1. Gage length is the same as original length 2. The table gives values of load (tension force) and deformation (elongation) measured by the testing machine- you need to convert these values to nominal/engineering stress and nominal/engineering strain to plot the conventional stress-strain diagram. Load (kip) Elongation (in.) 0 0 1.50 0.0005 4.60 0.0015 8.00 0.0025 11.00 0.0035 11.80 0.0050 11.80 0.0080 12.00 0.0200 16.60 0.0400 20.00 0.1000 21.50 0.2800 19.50 0.4000 18.50 0.4600