8. (TCO 2) If a peripheral interrupt is activated while the 9S12G128 is executing an instruction in the main program, then the CPU _________ and then jumps to interrupt vector table to get the ISR address. (Points : 10)

finishes the current instruction stops in the middle of the current instruction depending on the instruction, may finish or stop in the middle of the current instruction immediately terminates the current instruction

1. (TCO 3) The 9S12G128 event counter is configured and enabled for rising edge. A 1.0 Hz waveform (TTL logic levels) is applied to the counter input. With the counter starting at 0xFFF0, what is the data contained in the event counter after 16.52 seconds (first count increment occurred at 0 seconds)? (Points : 10)

0x0011 0x0021 0x0001 16.5

Question 1.1. (TCO 3) To measure the duty cycle, we capture the time for (Points : 10)

rising edge followed by falling edge plus the very next rising edge. falling edge followed by rising edge. two consecutive rising edges. two consecutive falling edges.

Question 3.3. (TCO 3) For the 9S12G128 timer module, the pulse width modulation output is provided via the pins of which port? (Points : 10)

Port T Port A Port P Port B