A Camco Model 'Hydro-6' retrievable packer is run into a low fluid weil. The 'Hydro-6' packer requires a differential pressure of 3,000 psi to set, Given the weil conditions below, determine the following: 1. The pressure that must be applied at the surface to set the packer if the well fluid is encountered at 3,500 ft ? 2. If the fluid level is 7,000ft instead of 3,500ft, how much fluid must be added, in barreis, to set the packer? Well Data: Tubing: 27/g6.5lb/ft EUE Packer Depth: 8,000ft Well Fuid: 9.8lb/gal saltwater Setting Pressure =3,000 psi A Camco Model 'Hydro-6' retrievable packer is run into a low fluid weil. The 'Hydro-6' packer requires a differential pressure of 3,000 psi to set, Given the weil conditions below, determine the following: 1. The pressure that must be applied at the surface to set the packer if the well fluid is encountered at 3,500 ft ? 2. If the fluid level is 7,000ft instead of 3,500ft, how much fluid must be added, in barreis, to set the packer? Well Data: Tubing: 27/g6.5lb/ft EUE Packer Depth: 8,000ft Well Fuid: 9.8lb/gal saltwater Setting Pressure =3,000 psi