A machine is available 10 hours a day. Each part takes 90 minutes to fabricate and 10 minutes to setup. 10% of the parts made are defective and must go through the machine again to be reworked, during which both setup and fabrication have to be performed again. The machine is idle for any unused time. On average, 4 good parts are made each day. The overall equipment effectiveness of the machine is (round up to one decimal places). A key joint in a precision machining process has a lower specification limit of a width of 0.98 mm and an upper specification limit of 1.01 mm. The standard deviation is 0.02 mm and the mean is 1 mm. What is the process capability index for the precision machining process? Is the process capable of meeting requirements? O 1.33: Yes O 1.33; No 0.25: Yes O 0.25, No