A machining process has a required dimension on a part of 0.515 0.007 inches. Twenty-five parts were measured. What is its capability for pro-ducing within acceptable limits?

\begin{tabular}{|l|l|l|c|} \hline & \multicolumn{2}{|c|}{ A } & \multicolumn{1}{c|}{ B } \\ \hline & A machining process has a required dimension on a par \\ 0.007 inches. Twenty-five parts were measured. What is its c \\ pro-ducing within acceptable limits? \\ \hline 1 & \multicolumn{1}{|l|}{ Nominal specification } & 0.515 \\ \hline 3 & Upper specification limit & 0.522 \\ \hline 4 & Lower specification limit & 0.508 \\ \hline 5 & & \\ \hline 6 & & & \\ \hline 7 & & & 1 \\ \hline 8 & & & 0.497 \\ \hline 9 & & & 0.506 \\ \hline 10 & 11 & & 0.527 \\ \hline 12 & & 0.518 \\ \hline 13 & & & 0.505 \\ \hline 14 & & & \\ \hline 15 & & & \\ \hline 16 & & & \\ \hline 17 & & & \\ \hline 18 & & Cprocess Capability Analysis & \\ \hline 19 & & & \\ \hline 20 & & & \\ \hline 21 & & & \\ \hline 22 & & & \\ \hline 23 & & & \\ \hline 24 & & & \\ \hline \end{tabular} Histogram \begin{tabular}{|c|c|c|c|} \multicolumn{3}{|c|}{ Sample Number } & \\ \hline 2 & 3 & 4 & 5 \\ \hline 0.516 & 0.517 & 0.504 & 0.520 \\ \hline 0.518 & 0.514 & 0.513 & 0.524 \\ \hline 0.517 & 0.513 & 0.519 & 0.520 \\ \hline 0.522 & 0.515 & 0.513 & 0.518 \\ \hline 0.516 & 0.516 & 0.512 & 0.514 \\ \hline \end{tabular} \begin{tabular}{l|l} \hline+2 \\ \hline & \\ \hline \end{tabular}