A UMTS UE sending data on the uplink. It has three DPDCH channels (DPDCH1, DPDCHz, and DPDCH) and one DPCCH channel. All data channels use SF=8 and the control channel uses SF=16 for the sake of simplicity. Bo = 0.7 and the rate between B and B, is selected as 7/15. No scrambling code mechanism is used. Lastly, due to fading, ALL signal values are reduced by 0.6 while being transmitted over the channel. Considering the following input bit sequences for the four channels, write down the coding process at the UE, what is the emitted bit sequence from the UE, write down the decoding process at the Node-B, and the resulting decoded bit sequence for each channel. DPDCH,={0,1, 0, 0, 1, 0, 1}, DPDCH;= {1, 0, 1, 0, 0, 1, 1}, DPDCH,= {0, 0, 1, 1, 0, 1, 0}, DPCCH= {1, 0, 1, 1, 0} A UMTS UE sending data on the uplink. It has three DPDCH channels (DPDCH1, DPDCHz, and DPDCH) and one DPCCH channel. All data channels use SF=8 and the control channel uses SF=16 for the sake of simplicity. Bo = 0.7 and the rate between B and B, is selected as 7/15. No scrambling code mechanism is used. Lastly, due to fading, ALL signal values are reduced by 0.6 while being transmitted over the channel. Considering the following input bit sequences for the four channels, write down the coding process at the UE, what is the emitted bit sequence from the UE, write down the decoding process at the Node-B, and the resulting decoded bit sequence for each channel. DPDCH,={0,1, 0, 0, 1, 0, 1}, DPDCH;= {1, 0, 1, 0, 0, 1, 1}, DPDCH,= {0, 0, 1, 1, 0, 1, 0}, DPCCH= {1, 0, 1, 1, 0}