Addressing Table Device Interface R1 GO/0 IP Address 192.168.0.1 Subnet Mask Default Gateway N/A G0/1 N/A Loo N/A Lo1 N/A S1 VLAN 1 PC-A NIC PC-B NIC Step 1: Create a subnetting scheme that meets the required number of subnets and required number of host addresses. In this scenario, you are a network administrator for a small subdivision within a larger company. You must create multiple subnets out of the 192.168.0.0/24 network address space to meet the following requirements: The first subnet is the employee network. You need a minimum of 25 host IP addresses. The second subnet is the administration network. You need a minimum of 10 IP addresses. The third and fourth subnets are reserved as virtual networks on virtual router interfaces, loopback 0 and loopback 1. These virtual router interfaces simulate LANs attached to R1. You also need two additional unused subnets for future network expansion. Note: Variable length subnet masks will not be used. All of the device subnet masks will be the same length.