Analyze the circuit using the environmental currents method.a$)$ State the direction of current for each circle.b$)$ Create the environmental equations and write the system of equations in matrix form.c$)$ Solve the system of equations you created using the Cramer Method.d$)$ Show all the elements of each matrix whose determinant you have taken.e$)$ Find the currents for each environment. If negative signed currents are obtained, redraw the circuit and remove all currents.Show the positive directions. $($Take $3$ digits after the comma, pay attention to the units, $0\mathrm{.}0000$xxx AmpereDo not write things like$)$f$)$ Find the voltages on the resistors according to the $+-$ signs indicated. $($Signs of the voltages foundimportant, take $3$ digits after the comma, pay attention to the units, do not write things like $0\mathrm{.}0000$xxx Volt$)$g$)$ Calculate the required power values with a safety coefficient of $1\mathrm{.}5$ to prevent damage to the resistors.h$)$ To prevent voltage sources from being damaged, set the required power values with a safety coefficient of $1\mathrm{.}5.$Calculate. $R1=30$

$R2=1\mathrm{.}8k$ ohm

$R3=86$

$R4=1\mathrm{.}4M$

ohm

$R5=6\mathrm{.}8k$ ohm

$R6=10k$ OHM

$R7=3162\mathrm{.}2$

$R8=60$ohm

$R9=3\mathrm{.}2M$

ohm

$R10=10$

$V1=163V$

$V2=45V$

$V3=54,7$