Part 1: A manufacturing system comprises 3 sequential processes, i.e. Processes 1, 2, and 3. Each...
Fantastic news! We've Found the answer you've been seeking!
Question:
Transcribed Image Text:
Part 1: A manufacturing system comprises 3 sequential processes, i.e. Processes 1, 2, and 3. Each process has its own workstation (resource), i.e. Workstations 1, 2, and 3. Their processing times are constants, respectively as 12, 8, and 11.8 minutes. There are unlimited buffers in front of all workstations. All transfer times between any two Processes, between Create and Process 1, and between Process 3 and Dispose are 0 minutes. The part inter-arrival times to the system are UNIFORM(12,15) minutes. The first arrival is at time 0 and the parts arrive one at a time. For Workstation 3, there is a probability that a part needs to be reprocessed by Workstation 2 (and then go through Workstation 3 again). The probability for a part to revisit Workstation 2 remains constant and is independent of the number of revisits. This probability of revisiting is 8%. Develop a simulation model in Arena and make it runs for 16,000 minutes with one replication. Save and upload your answer as Part1.doe. Requirements: • Animate the seize area(s) and resource(s). • Animate the entity as balls. Resize them if they are too big or small. Animate the queue(s). Highlight them with rectangular boxes. Note: You can get different results by defining the True and False branches of your Decide module differently. Both are acceptable. Questions: 1. How many parts have been processed at the end of the simulation? II. What is the average utilisation level of Workstation 2? III. During the simulation, what is the maximum number of visits (visit + revisit) that a part has to go through before reaching Dispose? Hint: You will need to use Assign and Record modules. Part 1: A manufacturing system comprises 3 sequential processes, i.e. Processes 1, 2, and 3. Each process has its own workstation (resource), i.e. Workstations 1, 2, and 3. Their processing times are constants, respectively as 12, 8, and 11.8 minutes. There are unlimited buffers in front of all workstations. All transfer times between any two Processes, between Create and Process 1, and between Process 3 and Dispose are 0 minutes. The part inter-arrival times to the system are UNIFORM(12,15) minutes. The first arrival is at time 0 and the parts arrive one at a time. For Workstation 3, there is a probability that a part needs to be reprocessed by Workstation 2 (and then go through Workstation 3 again). The probability for a part to revisit Workstation 2 remains constant and is independent of the number of revisits. This probability of revisiting is 8%. Develop a simulation model in Arena and make it runs for 16,000 minutes with one replication. Save and upload your answer as Part1.doe. Requirements: • Animate the seize area(s) and resource(s). • Animate the entity as balls. Resize them if they are too big or small. Animate the queue(s). Highlight them with rectangular boxes. Note: You can get different results by defining the True and False branches of your Decide module differently. Both are acceptable. Questions: 1. How many parts have been processed at the end of the simulation? II. What is the average utilisation level of Workstation 2? III. During the simulation, what is the maximum number of visits (visit + revisit) that a part has to go through before reaching Dispose? Hint: You will need to use Assign and Record modules.
Expert Answer:
Answer rating: 100% (QA)
Answer There are a total of 3656 parts that have been processed at the end of the simulation incase ... View the full answer
Related Book For
Principles of Information Systems
ISBN: 978-0324665284
9th edition
Authors: Ralph M. Stair, George W. Reynolds
Posted Date:
Students also viewed these general management questions
-
What is the potential advantage of using a template for SAP R/3 implementations at BAT?
-
How might you use a local area network in your home? What devices could connect to such a network?
-
How might you use the network approach to help prepare cost estimates?
-
Show that is one-to-one and find f(x) = J2 1 + 1 dt
-
Let S represent the amount of steel produced (in tons). Steel production is related to the amount of labor used (L) and the amount of capital used (C) by the following function: S = 20 L0.30 C 0.70...
-
1. An employer interviews 12 people for four openings at a company. Five of the 12 people are women. All 12 applicants are qualified. In how many ways can the employer fill the four positions when...
-
The Kowal Manufacturing Company employs about fifty production workers and has the following payroll procedures. The factory foreman interviews applicants and on the basis of the interview either...
-
1. Why does ERP customization lead to so many headaches when it is time to upgrade? 2. Why were the systems customized in the first place? 3. Cutting payments outright to ERP vendors may not be...
-
The hip roof shown in the below Figure 2 is constructed of 2x10 rafters spaced 16 inches on center. The hip rafters are 1 -inch-wide by 12-inch-high GLBs. The roof has a slope of 4:12. Prepare a list...
-
Absorption Costing Versus Variable Costing. Prime, Inc., produces tricycles. The company has no finished goods inventory at the beginning of year 1. The following information pertains to Prime, Inc....
-
explain the interplay between respiratory metabolism and cellular signaling pathways, such as AMP-activated protein kinase (AMPK) and mammalian target of rapamycin (mTOR), in regulating energy...
-
1. Define a three-dimensional array at the logical level. 2. Suggest some applications for three-dimensional arrays.
-
Name two software tools that you have used in developing computer programs.
-
Implement SplitLists described in Exercise 3 as a client function. An Unsorted Type ADT is to be extended by the addition of function SplitLists, which has the following specifications: Exercise 3 1....
-
To tell if one element in ZooGraph has relation X to another element, you look for a path between them. Show whether the following statements are true, using the picture or adjacency matrix. 1....
-
Explain why software might need to be modified 1. in the design phase. 2. in the coding phase. 3. in the testing phase. 4. in the maintenance phase.
-
Projects are often initiated to solve business problems or create, exploit, or enhance an opportunity. Discuss how a project scope might be influenced by the business environment; then identify a...
-
Fill in each blank so that the resulting statement is true. 83 + 103 = ______ .
-
What specific actions can you take to avoid spyware?
-
What is the difference between DSS and knowledge management?
-
Expert systems can be built based on rules or cases. What is the difference between the two?
-
The equation of motion of a rocket, of mass \(m\), traveling vertically under a thrust \(F\) and air resistance or drag \(D\) is given by \[m \dot{u}=F-D-m g\] If \(m=1000 \mathrm{~kg}, F=50,000...
-
Use Rayleigh's method to solve Problem 2.26. Data From Problem 2.26:- A mass \(m\) is attached to a cord that is under a tension \(T\), as shown in Fig. 2.67. Assuming that \(T\) remains unchanged...
-
Find the natural frequency of the system shown in Fig. 2.54. Figure 2.54:- Rotating machine B Isolator (Helical springs) FIGURE 2.54 Isolated rotating machine. Foundation block
Study smarter with the SolutionInn App