Blast it! said David Wilson, president of Teledex Company. We've just lost the bid on the...
Fantastic news! We've Found the answer you've been seeking!
Question:
Transcribed Image Text:
"Blast it!" said David Wilson, president of Teledex Company. "We've just lost the bid on the Koopers job by $3,000. It seems we're either too high to get the job or too low to make any money on half the jobs we bid." Teledex Company manufactures products to customers' specifications and uses a job-order costing system. The company uses a plantwide predetermined overhead rate based on direct labor cost to apply its manufacturing overhead (assumed to be all fixed) to jobs. The following estimates were made at the beginning of the year: Manufacturing overhead Direct labor Fabricating. $ 372,750 Department Machining $ 426,000 Assembly $ 95,850 Total Plant $ 894,600 $ 213,000 $ 106,500 $ 319,500 $ 639,000 Jobs require varying amounts of work in the three departments. The Koopers job, for example, would have required manufacturing costs in the three departments as follows: Department Fabricating Machining Direct materials $ 4,300 Direct labor $ 5,400 $ 300 $ 600 Assembly $ 2,700 Total Plant $ 7,300 $ 7,500 $ 13,500 Manufacturing overhead ? 2 ? 2 Required: 1. Using the company's plantwide approach: a. Compute the plantwide predetermined rate for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 2. Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Under these conditions: a. Compute the predetermined overhead rate for each department for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 4. Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied. overhead). a. Compute the plantwide predetermined rate for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 2. Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined. overhead rates based on direct labor cost. Under these conditions: a. Compute the predetermined overhead rate for each department for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 4. Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied overhead). a. What was the company's bid price on the Koopers job using a plantwide predetermined overhead rate? b. What would the bid price have been if departmental predetermined overhead rates had been used to apply overhead cost? Complete this question by entering your answers in the tabs below. Required 1A Required 18 Required 2A Required 28 Required 4A Required 48 Using the company's plantwide approach, compute the plantwide predetermined rate for the current year. Predetermined overhead rate % of direct labor cost 25 a. Compute the plantwide predetermined rate for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 2. Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Under these conditions: a. Compute the predetermined overhead rate for each department for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 4. Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied overhead). a. What was the company's bid price on the Koopers job using a plantwide predetermined overhead rate? b. What would the bid price have been if departmental predetermined overhead rates had been used to apply overhead cost? Complete this question by entering your answers in the tabs below. Required 1A Required 18 Required 2A Required 28 Required 4A Required 4B Using the company's plantwide approach, determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. Manufacturing overhead cost applied < Required 1A Required 2A > ok nces a. Compute the plantwide predetermined rate for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 2. Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Under these conditions: a. Compute the predetermined overhead rate for each department for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 4. Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied overhead). a. What was the company's bid price on the Koopers job using a plantwide predetermined overhead rate? b. What would the bid price have been if departmental predetermined overhead rates had been used to apply overhead cost? Complete this question by entering your answers in the tabs below. Required 1A Required 18 Required 2A Required 28 Required 4A Required 48 Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Compute the predetermined overhead rate for each department for the current year. Predetermined Overhead Rate) Fabricating department % of direct labor cost Machining department % of direct labor cost Assembly department % of direct labor cost B a. Compute the plantwide predetermined rate for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 2. Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Under these conditions: 1 a. Compute the predetermined overhead rate for each department for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 4. Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied overhead). Book a. What was the company's bid price on the Koopers job using a plantwide predetermined overhead rate? int b. What would the bid price have been if departmental predetermined overhead rates had been used to apply overhead cost? rences Complete this question by entering your answers in the tabs below. Required 1A Required 18 Required 2A Required 28 Required 4A Required 48 Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. Manufacturing overhead cost applied ook a. Compute the plantwide predetermined rate for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 2. Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Under these conditions: a. Compute the predetermined overhead rate for each department for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 4. Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied overhead). a. What was the company's bid price on the Koopers job using a plantwide predetermined overhead rate? int b. What would the bid price have been if departmental predetermined overhead rates had been used to apply overhead cost? ences Complete this question by entering your answers in the tabs below. Required 1A Required 1B Required 2A Required 28 Required 4A Required 4B Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied overhead). What was the company's bid price on the Koopers job using a plantwide predetermined overhead rate? Company's bid price: < Required 2B Required 4B > "Blast it!" said David Wilson, president of Teledex Company. "We've just lost the bid on the Koopers job by $3,000. It seems we're either too high to get the job or too low to make any money on half the jobs we bid." Teledex Company manufactures products to customers' specifications and uses a job-order costing system. The company uses a plantwide predetermined overhead rate based on direct labor cost to apply its manufacturing overhead (assumed to be all fixed) to jobs. The following estimates were made at the beginning of the year: Manufacturing overhead Direct labor Fabricating. $ 372,750 Department Machining $ 426,000 Assembly $ 95,850 Total Plant $ 894,600 $ 213,000 $ 106,500 $ 319,500 $ 639,000 Jobs require varying amounts of work in the three departments. The Koopers job, for example, would have required manufacturing costs in the three departments as follows: Department Fabricating Machining Direct materials $ 4,300 Direct labor $ 5,400 $ 300 $ 600 Assembly $ 2,700 Total Plant $ 7,300 $ 7,500 $ 13,500 Manufacturing overhead ? 2 ? 2 Required: 1. Using the company's plantwide approach: a. Compute the plantwide predetermined rate for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 2. Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Under these conditions: a. Compute the predetermined overhead rate for each department for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 4. Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied. overhead). a. Compute the plantwide predetermined rate for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 2. Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined. overhead rates based on direct labor cost. Under these conditions: a. Compute the predetermined overhead rate for each department for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 4. Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied overhead). a. What was the company's bid price on the Koopers job using a plantwide predetermined overhead rate? b. What would the bid price have been if departmental predetermined overhead rates had been used to apply overhead cost? Complete this question by entering your answers in the tabs below. Required 1A Required 18 Required 2A Required 28 Required 4A Required 48 Using the company's plantwide approach, compute the plantwide predetermined rate for the current year. Predetermined overhead rate % of direct labor cost 25 a. Compute the plantwide predetermined rate for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 2. Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Under these conditions: a. Compute the predetermined overhead rate for each department for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 4. Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied overhead). a. What was the company's bid price on the Koopers job using a plantwide predetermined overhead rate? b. What would the bid price have been if departmental predetermined overhead rates had been used to apply overhead cost? Complete this question by entering your answers in the tabs below. Required 1A Required 18 Required 2A Required 28 Required 4A Required 4B Using the company's plantwide approach, determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. Manufacturing overhead cost applied < Required 1A Required 2A > ok nces a. Compute the plantwide predetermined rate for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 2. Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Under these conditions: a. Compute the predetermined overhead rate for each department for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 4. Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied overhead). a. What was the company's bid price on the Koopers job using a plantwide predetermined overhead rate? b. What would the bid price have been if departmental predetermined overhead rates had been used to apply overhead cost? Complete this question by entering your answers in the tabs below. Required 1A Required 18 Required 2A Required 28 Required 4A Required 48 Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Compute the predetermined overhead rate for each department for the current year. Predetermined Overhead Rate) Fabricating department % of direct labor cost Machining department % of direct labor cost Assembly department % of direct labor cost B a. Compute the plantwide predetermined rate for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 2. Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Under these conditions: 1 a. Compute the predetermined overhead rate for each department for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 4. Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied overhead). Book a. What was the company's bid price on the Koopers job using a plantwide predetermined overhead rate? int b. What would the bid price have been if departmental predetermined overhead rates had been used to apply overhead cost? rences Complete this question by entering your answers in the tabs below. Required 1A Required 18 Required 2A Required 28 Required 4A Required 48 Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. Manufacturing overhead cost applied ook a. Compute the plantwide predetermined rate for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 2. Suppose that instead of using a plantwide predetermined overhead rate, the company had used departmental predetermined overhead rates based on direct labor cost. Under these conditions: a. Compute the predetermined overhead rate for each department for the current year. b. Determine the amount of manufacturing overhead cost that would have been applied to the Koopers job. 4. Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied overhead). a. What was the company's bid price on the Koopers job using a plantwide predetermined overhead rate? int b. What would the bid price have been if departmental predetermined overhead rates had been used to apply overhead cost? ences Complete this question by entering your answers in the tabs below. Required 1A Required 1B Required 2A Required 28 Required 4A Required 4B Assume that it is customary in the industry to bid jobs at 150% of total manufacturing cost (direct materials, direct labor, and applied overhead). What was the company's bid price on the Koopers job using a plantwide predetermined overhead rate? Company's bid price: < Required 2B Required 4B >
Expert Answer:
Related Book For
Management Accounting
ISBN: 9780077185534
6th Edition
Authors: Will Seal, Carsten Rohde, Ray Garrison, Eric Noreen
Posted Date:
Students also viewed these accounting questions
-
Plantwide versus Departmental Overhead Rates; Underapplied or Overapplied Overhead Blast it! said David Wilson, president of Teledex Company. Weve just lost the bid on the Koopers job by $2,000. It...
-
4 pts A lottery winner will receive $0.5 mulhon at the end of each of the next se yearn. What is the future value of her winnings at the time of her final payment, given that the interest rate is 6%...
-
Identify whether each of the following items of operating expense is described according to its nature or function. Type of operating expense a. Cost of goods sold b. Delivery c. Wages and benefits...
-
A commuter must pass through three traffic lights on her way to work. For each light, the probability that it is green when she arrives is 0.6. The lights are independent. a. What is the probability...
-
True or False. The vibration caused by a rotating unbalanced disc can be eliminated by adding a suitable mass to the disc.
-
Baliga Co. produces and sells high-quality audio equipment. To finance its operations, Baliga Co. issued $18,000,000 of five-year, 8% bonds with interest payable semiannually at a market (effective)...
-
Please answer as soon as possible. Thanks. b) Draw a cart in four different positions on the track, as outlined below. i. First, draw the cart at the top of the first hill. Label it A. ii. Second,...
-
Writing a well-thought through, graduate-level paper of NOT LESS THAN four (4) pages, answer the following questions: 1.What is a context diagram? 2.When would you use a context diagram? 3.What are...
-
QUESTIONS: What is strategy? What is differentiation? What are the major steps for planning and developing a strategy? What is strategic drift? What are the steps for undertaking a SWOT Analysis?...
-
Small and Medium-sized Enterprises in periods of prolonged economic crisis may suffer from economic downturns " but is this indeed the case? Are they valid reasons, why small firms may have different...
-
In the field of sports, what are some case studies that highlight the role of motivation in achieving extraordinary athletic performances?
-
Suppose you are going to receive $13,500 per year for five years. The appropriate interest rate is 6.8%. a-1 What is the present value of the payments if they are in the form of an ordinary annuity?...
-
On May 31, the Cash account of Tesla had a normal balance of $5100. During May, the account was debited for a total of $12,300 and credited for a total of $11,600. What was the balance in the Cash...
-
Carlo Company makes bulk quantities of cleaning fluids. They currently sell 1,000 containers a month at a price of $22 per unit. If they added a disinfectant, they could charge $25 per unit for the...
-
Identify the Critical Infrastructure Physical Protection System Plan.
-
Sketch a hypothetical scatterplot for a sample of size 10 for two random variables with a population correlation of (a) 1.0; (b) -1.0 ; (c) 0.9; (d) -0.5 ; (e) 0.0.
-
Using the data in Exercise 3.3: a. Construct a \(95 \%\) confidence interval for \(p\). b. Construct a \(99 \%\) confidence interval for \(p\). c. Why is the interval in (b) wider than the interval...
-
Explain why the differences-of-means estimator, applied to data from a randomized controlled experiment, is an estimator of the treatment effect.
Understanding And Conducting Information Systems Auditing 1st Edition - ISBN: 1118343743 - Free Book
Study smarter with the SolutionInn App