Calculate the overall loss coefficient for a flat-plate solar collector located in Madison and sloped toward...
Fantastic news! We've Found the answer you've been seeking!
Question:
Transcribed Image Text:
Calculate the overall loss coefficient for a flat-plate solar collector located in Madison and sloped toward the equator with a slope equal to the latitude. Assume a single glass cover 25 mm above the absorber plate, a wind speed of 6.5 m/s, an absorber long-wave emittance of 0.11, and 70 mm of rock wool back insulation having a conductivity of 0.034 W/m °C. The mean plate temperature is 100°C, and the ambient temperature is 25°C. Neglect edge effects and absorption of solar radiation by the glass. The collectors are mounted flush on the surface of a house having a volume of 300 m³. The time is noon and Tdp = 20°C. Calculate the overall loss coefficient for a flat-plate solar collector located in Madison and sloped toward the equator with a slope equal to the latitude. Assume a single glass cover 25 mm above the absorber plate, a wind speed of 6.5 m/s, an absorber long-wave emittance of 0.11, and 70 mm of rock wool back insulation having a conductivity of 0.034 W/m °C. The mean plate temperature is 100°C, and the ambient temperature is 25°C. Neglect edge effects and absorption of solar radiation by the glass. The collectors are mounted flush on the surface of a house having a volume of 300 m³. The time is noon and Tdp = 20°C.
Expert Answer:
Related Book For
Fundamentals of Thermal-Fluid Sciences
ISBN: 978-0078027680
5th edition
Authors: Yunus A. Cengel, Robert H. Turner, John M. Cimbala
Posted Date:
Students also viewed these mechanical engineering questions
-
A 2 m by 2 m flat plate solar collector for domestic hot water heating is shown schematically in the sketch. Solar radiation at a rate of 750 W/m2 is incident on the glass cover which transmits 90%...
-
A flat plate solar collector of 3 m x 5 m area has an absorber plate that is to operate at a temperature of 70?C. To reduce heat losses, a glass cover is placed 0.05 m from the absorber and its...
-
Solar radiation is incident on the glass cover of a solar collector at a rate of 700 W/m 2 . The glass transmits 88 percent of the incident radiation and has an emissivity of 0.90. The entire hot...
-
A voltage V is applied to a dc electric motor. The armature winding resistance is equal to R. At what value of current flowing through the winding will the useful power of the motor be the highest?...
-
The gunner on a small assault boat fires six missiles at an attacking plane. Each has a 20% chance of being on-target. If two or more of the shells find their mark, the plane will crash. At the same...
-
Knox Company manufactures consumer products such as cleansers, air fresheners, and detergents. During a recent quarter, the value of the products made was $50 million, and the labor costs were $3...
-
3 P 2 / 13 P 1 Perform the indicated calculation.
-
The data in file XR11100 are the weights (in grams) for random samples of grain packages filled by two different filling machines. The machines have a fine adjustment for the mean amount of fill, but...
-
Nantucket Industries manufactures and sells two models of watches, Prime and Luxuria. It expects to sell 3,300 units of Prime and 2,000 units of Luxuria in 2019.The following estimates are given for...
-
The Production manager of the Good Time Wine Rack Company is retiring and the Managing Director is looking to replace her. You are preparing a work schedule as youare hoping to be offeredthe position...
-
The Eurocurrency market: Is a market for assets denominated in currencies other than that of the country in which 1) they are held. 2) Is a market in which euro-denominated assets are bought and...
-
Conduct a search on the internet and estimate what percentage of people in Germany belong to each blood group. Which type of visual would you choose to demonstrate the data? Explain your choice.
-
Businesses that need to deal with large collections of textual information can use text mining (also known as text analytics) to reduce the work involved in reading and analyzing everything from...
-
Read Figure 13.14, a solicited proposal, and (1) analyze the strengths and weaknesses of this document and (2) revise the document so that it follows this chapters guidelines. Figure 13.14: Memco...
-
Your organization is in the unfortunate position of having to cut its costs because sales and profits have reduced significantly during a period of difficult economic trading conditions. The senior...
-
Recall a social or work-related situation when you felt conversationally challenged. Describe how you could have used the guidelines in this chapter to engage more competently. a. If appropriate,...
-
Explain how Base Erosion Profit Shifting (BEPS) initiative is changing the dynamics of Double Tax Agreements (DTA) and Transfer Pricing regimes around the world and how these will impact on Fiji's...
-
Refer to Exercise 8.S.I. Construct a scatterplot of the data. Does the appearance of the scatterplot indicate that the pairing was effective? Explain. Exercise 8.S.I. A volunteer working at an animal...
-
Hot water is flowing at an average velocity of 4 ft/s through a cast iron pipe (k = 30 Btu/hftF) whose inner and outer diameters are 1.0 in and 1.2 in, respectively. The pipe passes through a...
-
The inner and outer surfaces of a 25-cm-thick wall in summer are at 27°C and 44°C, respectively. The outer surface of the wall exchanges heat by radiation with surrounding surfaces at...
-
Reconsider Prob. 1732. Using an appropriate software, investigate the effects of the thermal conductivities of the insulation material and the sheet metal on the thickness of the insulation. Let the...
-
What is the direction of the magnetic field at a point vertically (a) above (b) below segment 1 in Figure 28.5? Figure 28.5 Mapping the magnetic field of a current loop. The magnetic field...
-
Make a sketch showing the directions of the magnetic forces exerted on each other by (a) an electron moving in the same direction as the current through a wire, (b) a moving charged particle and a...
-
As the current loop in Figure 28.10 rotates over the first \(90^{\circ}\), do the magnitudes of (a) the magnetic force exerted on the horizontal sides and (b) the torque caused by these forces...
Study smarter with the SolutionInn App