Complete the Time Study Record Below. Follow the Math Instructions for each column as shown in the rectangle on the top right of the form. In other words, fill in the missing time values for columns 11, 13, 15 and 17. All the numbers you enter onto the Time Study Record must be rounded to three decimal places. Add all three numbers in Column 17 (Normal Time) and put the total of that column at the bottom of the form in the rectangle where it says "Total Normal Time =". Multiple the Total Normal Time by 0.15 (or 15% P,F & D which is Personal, Fatigue, and Delay) and put that answer where it says "15% P, F, and D =". Add the Total Normal Time and the 15% P, F, and D Time together and put the final answer where it says "Total Standard Time =". Element Description 1 to 10 = Each Individual Time 14 = Rating Factor (90% = 0.90, 100% = 1.00, 110% = 1.10) 11 = Total of all Times 15 = Base Time (13 multiplied by 14) 12 = Number of Time Values 16 = Frequency (1 = every cycle, 1/10 = once per 10 cycles) 13 = Average (11 divided by 12) 17 = Normal Time (15 multiplied by 16) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Time Time Time Time Time Time Time Time Time Time Total No. Avg. Rate Base Freq. Norm. Put belt in machine and then activate machine. .102 Put next box beside machine. Put full box on outgoing pallet. .095 10 1.05 1 .650 1 0.90 1/28 .400 1 1.10 1/28 Operation: Stamp & Box Belts Operator: Sam Lawson Equipment: Stamping Machine Date: February 4, 2016 Elapsed Time: 1.980 Minutes .087 .080 .090 .093 .112 .089 .095 Foreign Element Letter Codes and Explanations: 28 Leather Belts per Box. All times are in decimal minutes. .087 Total Normal Time = 15 % P, F, and D = Total Standard Time = Standard Time Per Leather Belt