COMPLETION

Because the $100$BaseT$4$ standard disappeared from the market and today has been forgotten, we simply use the term $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ when referring to $100$BaseTX.

With a$($n$)\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ network, you can get multiple signals to flow over the same wire at the same time, modulating to higher frequencies. This is how cable television and cable Internet work.

The $100-$megabit Ethernet standard that uses fiber$-$optic cable is called $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_.$

A $100$BaseFX network has a maximum distance of $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ kilometers between the hub and the node.

The NIC and the attached switch determine full$-$ or half$-$duplex during $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ process.

The version of GbE published under the IEEE $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ standard is known as $1000$BaseX, and is divided into a series of standards, with names such as $1000$BaseSX and $1000$BaseLX.

The Gigabit Ethernet standard $1000$BaseX, is divided into a series of standards, with names such as $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ and $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_.$

The dominant Gigabit Ethernet standard is $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_.$

$1000$BaseSX networks use $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ fiber$-$optic cable.

$1000$BaseSX cabling has a$($n$)\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ nm wavelength.

$\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ is the long$-$distance carrier for Gigabit Ethernet.

In the United States, many fiber experts consider the $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ connector to be the predominant fiber connector.

A$($n$)\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ connector adds an $8-$degree angle to the curved end, lowering signal loss even further than an Ultra Physical Contact $($UPC$)$ connector $-$ plus, its connection does not degrade from multiple insertions, unlike earlier connection types.

$10$GBaseT running on CAT $6$ has a maximum cable length of only $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ meters.

$\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$transceivers have only a single optical port designed inside to send on one wavelength, such as $1310$ nm$,$ and receive on a different wavelength, such as $1550$ nm$.$

$1000$BaseLX has a maximum length of $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ kilometers.

The standard connector type today is called a$($n$)\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ connector because the two pieces of fiber touch when inserted.

You can use dedicated $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ to connect any type of Ethernet cabling together.

One of the most popular transceivers currently used in $10$ GbE is called the $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_.$

Most $10$GBase BiDi transceivers use SFP$+$ connectors, however; $40$GBase BiDi transceivers use $\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_$ optics.