Consider processing the data from TC1047A temperature sensor (A7) on the OE Lab Board. The full voltage range (0.5V to 1.75V) of the sensor is mapped to the temperature range of 0 to 125C. Consider the ADC channel used has a 12-bit resolution. Develop a complete Arduino sketch that does the following: 1. Start the analog to digital conversion process by toggling the switch (DIN30) to the ON position 2. Sample the TC1047A temperature sensor data on A7 at a rate of 1Hz, print each data sample in degrees Fahrenheit with one decimal digit on the Serial Monitor screen per line (F = 975 x C + 32C) 3. When the toggle switch (DIN 29) is on, the sampling, calculation and printing operations will be halted Consider processing the data from TC1047A temperature sensor (A7) on the OE Lab Board. The full voltage range (0.5V to 1.75V) of the sensor is mapped to the temperature range of 0 to 125C. Consider the ADC channel used has a 12-bit resolution. Develop a complete Arduino sketch that does the following: 1. Start the analog to digital conversion process by toggling the switch (DIN30) to the ON position 2. Sample the TC1047A temperature sensor data on A7 at a rate of 1Hz, print each data sample in degrees Fahrenheit with one decimal digit on the Serial Monitor screen per line (F = 975 x C + 32C) 3. When the toggle switch (DIN 29) is on, the sampling, calculation and printing operations will be halted