Perform on PSPICE according to the requirement below.

How to solve it? for reference cop the link below and paste into your browser.

https://drive.google.com/file/d/1cHsN6cW29LjNWmepxtDeu6AVBCto79iT/view?usp=sharing

Here is the calculation for the amp:

https://drive.google.com/drive/folders/1qL8GTnkKKC2rjzMgF6xjkHW5dBHqVruY?usp=sharing

Transcribed Image Text:

Design a Common Emitter Amplifier using Q2N3904 npn transistor from pspice. - Use voltage divider bias configuration. - Assume load resistor RL= 18kohm, The amplifier input Impedance must be > 25 kohm - Voltage gain Av= -36. (at 5kHz) 13 < Vcc <18 V 13uF < Caps <18uF 1. Test the transistor in pspice using a simple thevinin equivalent bias circuit to estimate its current gain value b that will be used in further calculations (use bias point detail) 2. Design the dc bias such that VCE is approximately 0.5Vcc, 3mA 1.5mA <lc< Design a Common Emitter Amplifier using Q2N3904 npn transistor from pspice. - Use voltage divider bias configuration. - Assume load resistor RL= 18kohm, The amplifier input Impedance must be > 25 kohm - Voltage gain Av= -36. (at 5kHz) 13 < Vcc <18 V 13uF < Caps <18uF 1. Test the transistor in pspice using a simple thevinin equivalent bias circuit to estimate its current gain value b that will be used in further calculations (use bias point detail) 2. Design the dc bias such that VCE is approximately 0.5Vcc, 3mA 1.5mA <lc<

Answer rating: 100% (QA)

Solution Here Vs 5Cos15t 30 5 Sin15t 3090 Or Vs 5 Sin15t 120 Volts Also Is 3 Sin15t 3 Sin15t 0 Amp M... View the full answer