Create a minimum of 3 subnets that will allow around 50 hosts per vlan. Create a spreadsheet and show the ranges of each subnet and assign a vlan. List the network address and broadcast address for each subnet in the spreadsheet. Create a network (subnet) to use to connect the routers. Label the routed links and IP addresses of each device. Assign IP addresses to each of the devices using DHCP. Add all this information to your spreadsheet and provide the Ip address for each of the interfaces on the routers. Be sure to map out the ip address per interface for each of the devices and include the default gateway and the subnet mask. Each connected device needs an IP address configured. This address should be on the spreadsheet and in the notations of the diagram.