Edge Count Setup A Settings 1.23 1000 Initial Count Active Edge Rising B 0 1.23 JOELL Count Direction Count Up Input Terminal /Dev2/ DAQ Assistant data error out stopped task out device name error in 1.23 D Timing Settings Acquisition Mode 1 Sample On Demand) LEDBLL stop STOP -TF a) Write the values of A, B, C, and D after 4 iterations when measured pulse with the period of 0.1 s is applied. (15 points) b) In order to measure revolution per minute (RPM) using a 360 PPR encoder, Write the formula using an appropriate value in the algorithm (e.g, rpm = 360B / 60 ).( 15 points) Edge Count Setup A Settings 1.23 1000 Initial Count Active Edge Rising B 0 1.23 JOELL Count Direction Count Up Input Terminal /Dev2/ DAQ Assistant data error out stopped task out device name error in 1.23 D Timing Settings Acquisition Mode 1 Sample On Demand) LEDBLL stop STOP -TF a) Write the values of A, B, C, and D after 4 iterations when measured pulse with the period of 0.1 s is applied. (15 points) b) In order to measure revolution per minute (RPM) using a 360 PPR encoder, Write the formula using an appropriate value in the algorithm (e.g, rpm = 360B / 60 ).( 15 points)