Extend the base implementation to support MIPS instructions including sub, j, slt, beq, jal, jr.

adder_32.v `timescale 1ns / 1ps

module adder_32(A, B, S); input [31:0] A, B; output reg [31:0] S;

always @(A, B) begin S = A + B; end endmodule

inc4_32.v `timescale 1ns / 1ps

module inc4_32(A, S); input [31:0] A; output reg [31:0] S;

always @(A) begin S = A + 4; end endmodule

mem_1024x32.v `timescale 1ns / 1ps module mem_1024x32(clk, ra, rd, re, wa, wd, we); input clk; input [9:0] ra, wa; input re, we; output reg [31:0] rd; input [31:0] wd; reg [31:0] memory [0:1023]; always @(posedge clk) begin if (we) begin memory[wa] = wd; end end always @* begin if (re) begin rd = memory[ra]; end else begin rd = 0; end end endmodule

mipszy_ctrl.v `timescale 1ns / 1ps

module mipszy_ctrl(ir31_26, ir5_0, rf_wd_s, rf_wa_s, rf_we, rf_r1e, rf_r2e, add2_s, dm_we, dm_re);

input [5:0] ir31_26, ir5_0; output reg rf_wd_s, rf_wa_s, rf_we, rf_r1e, rf_r2e; output reg add2_s; output reg dm_we, dm_re;

always @* begin if (ir31_26 == 'b100011) begin // lw rf_wd_s = 0; rf_wa_s = 1; rf_we = 1; rf_r1e = 1; rf_r2e = 0; add2_s = 0; dm_we = 0; dm_re = 1; end else if (ir31_26 == 'b101011) begin // sw rf_wd_s = 0; rf_wa_s = 0; rf_we = 0; rf_r1e = 1; rf_r2e = 1; add2_s = 0; dm_we = 1; dm_re = 0; end else if (ir31_26 == 'b001000) begin // addi rf_wd_s = 1; rf_wa_s = 1; rf_we = 1; rf_r1e = 1; rf_r2e = 0; add2_s = 0; dm_we = 0; dm_re = 0; end else if (ir31_26 == 'b000000 && ir5_0 == 'b100000) begin // add rf_wd_s = 1; rf_wa_s = 0; rf_we = 1; rf_r1e = 1; rf_r2e = 1; add2_s = 1; dm_we = 0; dm_re = 0; end else begin rf_wd_s = 0; rf_wa_s = 0; rf_we = 0; rf_r1e = 0; rf_r2e = 0; add2_s = 0; dm_we = 0; dm_re = 0; end end endmodule

MIPSzy.v `timescale 1ns / 1ps

module MIPSzy(clk, rst); input clk, rst;

// Ctrl wires wire rf_wd_s, rf_wa_s, rf_we, rf_r1e, rf_r2e; wire add2_s; wire dm_we, dm_re;

// PC wires wire [31:0] pc_out, pc_inc4;

// IM/IR wires wire [31:0] ir; wire [5:0] ir31_26, ir5_0; wire [4:0] ir20_16, ir15_11, ir25_21; wire [15:0] ir15_0;

// SW wires wire [31:0] ir15_0_se;

// RF wires wire [4:0] rf_wa; wire [31:0] rf_wd; wire [31:0] rf_r1d, rf_r2d;

// Adder wires wire [31:0] add2, add1, add_sum;

// DM wires wire [31:0] dm_a; wire [31:0] dm_wd; wire [31:0] dm_rd;

// internal connections assign dm_a = rf_r1d; assign dm_wd = rf_r2d; assign add1 = rf_r1d;

assign ir31_26 = ir[31:26]; assign ir5_0 = ir[5:0]; assign ir20_16 = ir[20:16]; assign ir15_11 = ir[15:11]; assign ir25_21 = ir[25:21]; assign ir15_0 = ir[15:0];

// component instantiations mipszy_ctrl CTRL(ir31_26, ir5_0, rf_wd_s, rf_wa_s, rf_we, rf_r1e, rf_r2e, add2_s, dm_we, dm_re); register_32 PC(clk, rst, 1'b1, pc_inc4, pc_out); inc4_32 PC_inc(pc_out, pc_inc4); mux2x1_32 RF_wd_mux(add_sum, dm_rd, rf_wd_s, rf_wd); mux2x1_32 RF_wa_mux(ir20_16, ir15_11, rf_wa_s, rf_wa); regfile_32x32 RF(clk, rst, ir25_21, rf_r1d, rf_r1e, ir20_16, rf_r2d, rf_r2e, rf_wa, rf_wd, rf_we); signext_16_32 SE(ir15_0, ir15_0_se); mux2x1_32 ADD_mux(rf_r2d, ir15_0_se, add2_s, add2); adder_32 ADD(add1, add2, add_sum); mem_1024x32 IM(clk, pc_out[11:2], ir, 1'b1, 1'b0, 1'b0, 1'b0); mem_1024x32 DM(clk, dm_a[11:2], dm_rd, dm_re, dm_a[11:2], dm_wd, dm_we); endmodule

mux2x1_32.v `timescale 1ns / 1ps module mux2x1_32(I1, I0, s, D); input [31:0] I1, I0; input s; output reg [31:0] D; always @(I1, I0, s) begin if (!s) begin D = I0; end else begin D = I1; end end endmodule

regfile_32x32.v `timescale 1ns / 1ps

module regfile_32x32(clk, rst, r1a, r1d, r1e, r2a, r2d, r2e, wa, wd, we); input clk, rst; input [4:0] r1a, r2a, wa; input r1e, r2e, we; output reg [31:0] r1d, r2d; input [31:0] wd;

integer i; reg [31:0] registers [0:31]; // Write procedure always @(posedge clk) begin if (rst) begin for (i = 0; i < 32; i = i+1) begin registers[i] = 0; end end else if (we) begin registers[wa] = wd; end end // Read ports procedure always @* begin // Read port 1 if (r1e) begin r1d = registers[r1a]; end else begin r1d = 0; end

// Read port 2 if (r2e) begin r2d = registers[r2a]; end else begin r2d = 0; end end endmodule

register_32.v `timescale 1ns / 1ps

module register_32(clk, rst, ld, D, Q); input clk, rst; input ld; input [31:0] D; output reg [31:0] Q;

always @(posedge clk) begin if (rst) begin Q = 0; end else if (ld) begin Q = D; end end endmodule

signext_16_32.v `timescale 1ns / 1ps

module signext_16_32(I, O); input signed [15:0] I; output reg [31:0] O;

always @(I) begin O = I; end endmodule