gnment 5 - Weeks 9 & 11 - Chapter 7 Help Save PA 7-5 (Static) Keuka Studies does custom metal sculptures... Keuka Studies does custom metal sculptures of horses and other animals. A horse sculpture is composed of numerous parts. They use a lathe to construct two types of parts. The "Body part is used to support the torso of the horse and the 'Leg" part is used to support the legs. Each horse sculpture needs 1 Body part and 4 Leg parts. Switching between either of the types of parts requires 25 minutes Once ready to produce, the lathe produces a Body part in 4 minutes and a single Leg part in 2 minutes. The lathe only makes horse parts. For parts (a)(d) assume Keuka operates a cyclic schedule in which they make 100 Body parts and then 400 Leg pal Round your answers to 1 decis place. All measures should be converted into hourly units (for example, flow rate should be in flow units per hour) Assume that the Lathe resource is the bottleneck. What is the maximum number of horse a. sculptures Keuka can make per hour? In other words, what is the capacity of the Lathe resource and the process? Assume that the Lathe resource is the bottleneck. Further, suppose that there is sufficient demand. What is the utilization (%) of the lathe? Round your answer to 1 decimal place Suppose Keuka is capacity-constrained. Also, suppose that the process now has an Assembly resource which has 1 worker who is able to assemble a horse sculpture in 16 minutes. This is in addition to the Lathe resource. What is the average inventory of Body parts? Suppose Keuka is capacity-constrained. Also, suppose that the process now has an d. Assembly resource which has 1 worker who is able to assemble a horse sculpture in 16 minutes. This is in addition to the Lathe resource. What is the average Inventory of Legs? Round your answer to 1 decimal place