Hello, can anyone help me with these few problems?

1) Lawn Sprinkler Design Design the controller for a lawn sprinkler system. The controller accepts three inputs: START, DRYNESS, and RAIN. It produces two outputs: ON, and FLOW. The description of input/output signals is as follows: START = 1. Start sprinkler in the morning (ON-1), f and only if it is needed. DRYNESS : is a 2-bit input: 00 too dry, o|-dry, 10-wet, and 1-fully watered. RAIN-.It is raining and the sprinkler should not be turned on. ON-1. Turn on the sprinkler system. FLOW is a 2-bit output which controls the flow of water: 11 = maximum flow, 10 drip, and 00 = no flow. medium flow, 01 = . The sprinkler system is turned on (set ON-1), if START-1. The lawn is not fully watered and it is not raining. The output flow should be "maximum" when the lawn is too dry, "medium when it is dry, and "drip" when it is wet. The sprinkler should be turned off when the lawn is fully watered. Design this controller using minimum logic for every output. Draw the schematic of the design using gates. 2) Seven Segment Decoder Search the internet to understand what a 7-segment display is. Design a binary-to-7- segment decoder using minimal digital logic gates as possible. Your design should include the logic design for all seven outputs. The design accepts a 4-bit BCD digit as inputs and produces appropriate outputs which will can be displayed using one 7-segment LED display. Draw the schematic of the design