I need to write a program in C in the MPLAB X IDE, that performs the following function on the MICROCHIP Microcontroller Model# PIC16F1517.

Hint: you can single out particular bits using the binary bitwise and operator& xPORTC; if ((PORTC & 0b00000100) !0) else An you cnstit bits kauipbying by a pamsr of2 Write a program that configures PORTB as an input, and PORTD as an output. Pins RB3-RBO should be interpreted as a 4-bit number X1. Pins RB7-RB4 should be interpreted as a second 4 bit number X2. The program should add X1+X2 and display the result on a seven segment display as a hex number (0 through F), driven by PORTD through resistors. An external BCD to 7 segment integrated circuit is NOT needed and should not be used. If the result is greater than hexadecimal F (decimal 15), a simple dash should be displayed. The program should have a while (1) loop so that it repeatedly reads the input and displays the output Hint: you can single out particular bits using the binary bitwise and operator& xPORTC; if ((PORTC & 0b00000100) !0) else An you cnstit bits kauipbying by a pamsr of2 Write a program that configures PORTB as an input, and PORTD as an output. Pins RB3-RBO should be interpreted as a 4-bit number X1. Pins RB7-RB4 should be interpreted as a second 4 bit number X2. The program should add X1+X2 and display the result on a seven segment display as a hex number (0 through F), driven by PORTD through resistors. An external BCD to 7 segment integrated circuit is NOT needed and should not be used. If the result is greater than hexadecimal F (decimal 15), a simple dash should be displayed. The program should have a while (1) loop so that it repeatedly reads the input and displays the output