I. With reference to the following subroutine to create a 10 ms delay movb movb #S06,TSCR2 movb #$01,TIOS ldd TCNT addd #3750 std TCO brclr TELG1, $01,wait : if equal. COF in TFL.Gl is set to I rts delay!0ms #590,TSCRI : enable TCNT and fast flags clear : configure prescale factor to 63 : enable 0CO : start an output compare operation : with 10 ms time delay wait 3 9 Bit 8 TCNT (H $0044 Bit 15 1413 $0045 Bit 76 5 0046 TEN TSWAI TSFRZ TEFCAO $004D TOI 12 1 Bit 0 TCNT (L) 0 -0 | TSCRI 0 TCRE PR2 PR1 PRO TSCR2 9 Bit 8 TCO (H) 54 3 2 1 Bit 0 TCO (L) 50051 Bit 7 6 TIOS: Timer Input-capture/Output-Compare Select Register TSCR1: Timer System Control Register 1 TSCR2: Timer System Control Register 2 TFLAG1: Timer Interrupt Flag 1 Register TCNT: Timer Counter Register TCO: TC register for Channel 0 TCx: TC register for Channel x Determine the missing parameters in the following table: Note: I M-106 Hz, and 1 ms= 10-3 s. Channel oC2 OC4 OC3 OCI Delay Time Prescale factor # of counts 2 ,500 E Clock 24 MHz 24 MHz 24 MHz 24 MHz 128 64 32 16 152 ms 60 ms 33,000 21,000 n 5 Texas A& M University-Kingsville, Electrical Engineering and Computer Science Department