4.2 A motor operates on a periodic duty cycle consisting of a loaded period of 20...
Fantastic news! We've Found the answer you've been seeking!
Question:
Transcribed Image Text:
4.2 A motor operates on a periodic duty cycle consisting of a loaded period of 20 min and a no load period of 10 min. The maximum temperature rise is 60°C. Heating and cooling time constants are 50 and 70 min respectively. When operating continuously on no load the temperature rise is 10°C. Determine (a) Minimum temperature during the duty cycle. (b) Temperature when the motor is loaded continuously. 4.3 The temperature rise of a motor when operating for 25 min on full load is 25°C and becomes 40°C when the motor operates for another 25 min on the same load. Determine heating time constant and the steady state temperature rise. 4.2 A motor operates on a periodic duty cycle consisting of a loaded period of 20 min and a no load period of 10 min. The maximum temperature rise is 60°C. Heating and cooling time constants are 50 and 70 min respectively. When operating continuously on no load the temperature rise is 10°C. Determine (a) Minimum temperature during the duty cycle. (b) Temperature when the motor is loaded continuously. 4.3 The temperature rise of a motor when operating for 25 min on full load is 25°C and becomes 40°C when the motor operates for another 25 min on the same load. Determine heating time constant and the steady state temperature rise.
Expert Answer:
Related Book For
Principles Of Managerial Finance
ISBN: 978-0136119463
13th Edition
Authors: Lawrence J. Gitman, Chad J. Zutter
Posted Date:
Students also viewed these electrical engineering questions
-
For each of the investments listed below, tell which of the following methods should be used for external financial reporting: (a) Cost-adjusted-to-market method, (b) Equity method, (c) Consolidation...
-
For each of the investments below, calculate the present value of the annual end-of-year returns at the specified discount rate over the given period. Investment Annual Returns ($) 1,200 5,500 700...
-
For each of the investments shown in the following table, calculate the rate of return earned over the unspecified timeperiod. Cash flow Beginning-of End-of pcriod valuc S 100 118,000 Investment...
-
Write a short email to your instructor, discussing what you believe are your greatest strengths and weaknesses from an employment perspective. Next, explain how these strengths and weaknesses would...
-
Use SPSS, or other software, to draw a set of boxplots (similar to Figure 5.4b) to illustrate the effect of increase the angle of rotation in the Mental Rotation dataset. The data can be found at...
-
As a result of highly profitable operations over a number of years. Eastern Manufacturing Corporation has accumulated a substantial investment portfolio. In auditing the financial statements for the...
-
For a sample of size 25, the following values were obtained: b0 = 3.25, b1 = 2.32, se = 3.53, (x x)2 = 224.05, and x = 0.98. a. Construct a 95% confidence interval for the mean response when x = 2....
-
You are in the market for a new refrigerator for your companys lounge, and you have narrowed the search down to two models. The energy efficient model sells for $500 and will save you $25 at the end...
-
Your company currently spends $10,000.00 per year to rent a light commercial shop facility. This cost inflates by 2% per year. For a nominal return rate of 6%, what is the real present value of the...
-
Kidd Company produces two products. Budgeted annual income statements for the two products are provided here: Required a. Based on budgeted sales, determine the relative sales mix between the two...
-
Question 4 2 pts I throw a ball at 7.8 m/s at an angle of 45 degrees above the horizontal. The ball is caught 0.94 m above where I threw it from. How far did it travel in the x direction? The ball...
-
We've been reviewing the duty to treat and the duty of care. I'd like to take a couple of minutes to review that section so that hopefully you have it all down. And then we'll move on to the issue of...
-
In the below circuit there is a 4.88 volts battery and three resistors with the following values: R 1 = 6.42 ohms, R 2 = 5.85 ohms, and R 3 = 4.81 ohms. Find the equivalent resistance (in ohms) for...
-
Leo and Elizabeth were getting married and planned a wedding reception for 150 people. They entered a contract with Snuffy's, a banquet hall, to hold the reception between 6:00 p.m. and 11:00 p.m. on...
-
Module 3 included an overview of the different and various legal remedies that are available to both the seller (lessor) and the buyer (lessee) in the event of breach of a sales (lease) contract. The...
-
Summarize the following case using IRAC and link it to Lisa's case down below, how are they different: Shortly after 3:00 a.m., Officer Paul Gramlich was on patrol with his canine when he spotted an...
-
Modern Artifacts can produce keepsakes that will be sold for $70 each. Nondepreciation fixed costs are $2,400 per year and variable costs are $35 per unit. a. If the project requires an initial...
-
The production budget of Artest Company calls for 80,000 units to be produced. If it takes 30 minutes to make one unit and the direct labor rate is $16 per hour, what is the total budgeted direct...
-
Describe the procedures that are typically used by an acquirer to value a target company, whether it is being acquired for its assets or as a going concern.
-
Gina Vitale has just contracted to sell a small parcel of land that she inherited a few years ago. The buyer is willing to pay $24,000 at the closing of the transaction or will pay the amounts shown...
-
Calculate the value of a $5,000-par-value bond paying quarterly interest at an annual coupon interest rate of 10% and having 10 years until maturity if the required return on similar-risk bonds is...
-
Describe the relationship between the main processor and coprocessor in a system with which you are familiar or one that you discover through Web research.
-
The instruction set of a certain processor does not have the JLE, JLT, JGE (jump less equal, less than, and greater or equal), and JGT instructions. Assume the process does not have all other...
-
Discuss the possibility of an n-address machine, where n > 3.
Study smarter with the SolutionInn App